donvito
Responses from donvito
| Splitter question Adjust the volume on the Schiit and use the other as the primary. Or you can do it vice versa! | |
| Splitter question You will need something like this Schiit SYS. You will need a turntable that has a built in phono preamp or you will need a separate phono preamp!https://www.schiit.com/products/syshttps://www.schiit.com/products/sys | |
| KEF Q350 with a Yamaha r-s202 receiver? They will work well together! | |
| Sloppy, muted bass response on Hegel h190 Most likely it’s those 35 year old KEF’s. Like anything else speakers don’t last forever! | |
| KEF Q350 with a Yamaha r-s202 receiver? That Yamaha is fine. Why would you want to replace it? | |
| Stereo pre-amps with dual outs for bi-amping and a subwoofer line out Rogue Audio has those features!http://www.rogueaudio.com/Preamplifiers.htm | |
| Another "Help me choose my speakers" thread You made a great choice with those Spendors. I have the smaller S5E’s and they are a great sounding speaker. BTW, the S6E was over 3 grand when new. You will sure like those Speakers. You will not need a subwoofer with them! | |
| Integrated under 1k (hopefully 500) for Wharfedale Dentons & Snell No! | |
| Integrated under 1k (hopefully 500) for Wharfedale Dentons & Snell Check out Yamaha!https://www.crutchfield.com/S-g46Q5ixT04e/shopsearch/yamaha_amplifier.html?XVINQ=SX2&XVVer=YJQ&a... | |
| Want to get into Analog A Technics SL-1200 would be a good start. Plenty of them listed on Ebay! | |
| Which speakers for a Yamaha A-S2000 It sounds like you should stick with a new JBL!https://www.musicdirect.com/Search?searchterm=jbl&sort=popularity%7CDESC&page=1&pagesize... | |
| Tube or solid state A tube phono stage is the best place to start. That’s where the rubber meets the road! BTW, that Denon has a conical stylus and some say it is boring! | |
| Recommendation about speakers with limited space behind The KEF LS50 will fit. They have port plugs. There is a pair listed here for $850!https://www.kefdirect.com/speaker/flagship-hi-fi-speakers/ls50/ls50-mini-monitor-speaker.html | |
| What setting should my amp’s input sensitivity switch be set at? A CDP has an output of 2 volts which is enough to drive your amp. If you find it is too loud just change the setting on the amp to a higher setting to lower the volume. That is a nice feature on that amp! | |
| Cary SLI 80 crumped BTW, This new Quicksilver sixty watt mono would be a nice fit with the Vandersteens!http://quicksilveraudio.com/products/sixty-watt-mono-amp/ |