f456gt
Responses from f456gt
| Quad ESL service, Electrostatic Solutions or Quads Unlimited ? Hi,My ESL 63s were at Picquet's shop for almost two years, it was a nightmare. He was always asking for more money. I received the speakers with parts missing. He said that the missing parts on the speakers were a result of very difficult times f... | |
| Better quality replacement for PEERLESS Tymphany 830669 woofers Sorry, but I should have been more clear. I need replacement drivers for the Gradient SW-63 dipole subwoofers for QUAD ESL-63 electrostatics. Gradient used a pair of Peerless 831812 drivers per enclosure. The possible replacements - 831857 and 830... | |
| Dahlquist DQ-1LP crossover owners Hi bdp24,I have just received an email from a First Watt dealer. He said that the B-4 is a two-way crossover. If you want to have three-way active crossover system, you will need two B-4’s and connect them in a cascading fashion. A “6 dB boo... | |
| Dahlquist DQ-1LP crossover owners bdp24, one more question, I know about Nelson Pass but I know nothing about the First Watt B4. Can it be used with the pair of dual drivers dipoles that I want to build?Best regards,Horacio | |
| Dahlquist DQ-1LP crossover owners Thanks chaps for the info about the Dahlquist. I was planning to buy one to use with a pair of Gradient W-63 OB clones using two 12" Peerless 830500 drivers per side, it is very similar to the prototype built by Sigfried Linkwitz.The problem with ... | |
| Aerial 10T Speaker Grills? Sorry, but there is no frame at all, just open weave foam. | |
| Shipping drivers to China Thank you. I called the Chinese American Chamber of Commerce in NY and was told that I would not be a problem. FedEx would accept it without seeing any problem either but the cost was $320. Then, I the went to another PO, no Chinese employees at t... | |
| McIntosh MQ101 does it work as a tone control? I found this one by NBS Cables at the hefty sum of $25K.http://www.nbscables.com/products/univ-tone-control.html | |
| McIntosh MQ101 does it work as a tone control? Thank you, Matt.I agree with you about tone controls. I am using a Klyne 6LX/P3 which I bought new in 1997, it an excellent preamp but has no tone controls.I was searching for an APT Holman APT1 but the ones available have been used and abused. On... | |
| SME 3009/II screening/can liner I did a search and noticed that mu-metal shielding foil costs around $3.79 per inch depending of its thickness. That would not be a problem for but how do I choose thickness and how do I apply it around the connections? Example, MuMETAL® Foil .002... | |
| SME 3009/II screening/can liner Thank you very much | |
| Thorens TD147: raising tonearm Dear Raul,No, there is no chance, the auto shut-off will not work.Regards,Orazio | |
| Thorens TD147: raising tonearm Thank you. I already did it several times following Thorens instructions. There is a limit to raise the arm, you cannot go any higher, this is an integrated turntable, it also interferes with the auto shut-off mechanism.Regards, | |
| Arm cable - soldering shield & ground? Please help I did replace the arm cable without connecting the shield to the strip terminal - left it floating as Nsgarch suggested.There is absolutely no hum at all.Many thanks, | |
| Arm cable - soldering shield & ground? Please help Sometimes I wonder if it is an overkill like you said. I have had two Breuer tonearms in the past, both had five monofilament wires, unterminated, as thin as sewing thread without any kind of shield or cover, just five loose wires hanging, unbelie... |