morrowaudio
Responses from morrowaudio
| Do speaker cables need a burn in period? Yes, speaker cables require breakin. Some companies offer break in service, or you can break them in with a CD on repeat or even a FM tuner hooked up and tuned to inter-station hiss. Mike Morrow | |
| Morrow Audio re-design announcement: No more Ag coated Cu; Increased numbers of runs. Thanks for all the post. Looks like we caused a real stir! First off, from a poster on the 1st page, we have always used individually insulated wires. The new design is simply some improvements on that, like more wires, progressive smaller gauges ... | |
| Morrow Audio re-design announcement: No more Ag coated Cu; Increased numbers of runs. We looked at the best discount that we could offer for those who have the old design, including a free swap for those within the return period, which we have even gone past a little to accommodate.For the others, we feel that 60% off as well as a ... | |
| Kimber Hero vs Morrow Audio vs ? Analog interconnects I completely understand but the post had us in the title. With that, it was appropriate to post some helps for the poster. However, since he has probably read it, I have removed it out of respect for those that voiced concern. | |
| Morrow Audio re-design announcement: No more Ag coated Cu; Increased numbers of runs. In response to fsonicsmithWe use high quality connectors. We provide a secure mechanical connection of the wire first to the connector, then solder it for a tight electrical fit. The details and how we do that are proprietary.As to your statement,... | |
| Morrow Audio re-design announcement: No more Ag coated Cu; Increased numbers of runs. I thought I would post this to help clear up any questions. Note that we still use our SSI Technology, each wire strand is still individually insulated from the others.You can see the full design change page at: http://morrowaudio.com/announcement... | |
| I saw an ad for Morrow Audio cables Hello all... yes, we retarget. We have it set to do so for 14 days. Even if our ad did not appear there, some other ad would since the website you are on has that space for google ads. As as for the discount to avoid a return, we did that many yea... | |
| Morrow IC's http://www.theabsolutesound.com/articles/morrow-audio-sp7-grand-reference-speaker-cable-and-ma4-refe...That review says it all...As for the comment by fsonicsmith: "Mr. Morrow told me he no longer cared a wit whether I was satisfied or not, the ... | |
| Power cable from Audio Research Ref 6 I am not sure why fsonicsmith made the over-rated comment about our MA6 interconnects. Perhaps it was a system synergy issue with his system. Here is some customer feedback... David P Submitted: 2017.05.18Hi Mike, Just a quick followup on my MA-6... | |
| morrow ma1 interconnect We now offer the KLE ’s as well. It can be system synergy. We have customers who have replaced the JW brand as well with our line, finding ours better. | |
| morrow ma1 interconnect Just a few MA1 interconnect testimonials...Peter M Submitted: 2016.10.08How often have you received more for your money? For that matter, when was the last time you received your money's worth for anything? It's been so long for me that receiving ... | |
| Mods for Avantgarde speakers Yes, there are big knobs on the sides that you will see that have a screw going through to the frame and into the bass cabinet. Very easy to remove, just turn the big knobs counter clockwise. I put magazines under the speaker cabinet so that the s... | |
| Mods for Avantgarde speakers CORRECTION...If you look at the side, the front bottom of the cabinet is JUST EVEN TO THE BACK vertical side support. | |
| Mods for Avantgarde speakers Update... As mentioned, I have the Duo Omega G2. The midrange horn is up top with the bass cabinet and tweeter under that, all mounted to the frame.I settled on removing the holding screws of the bass cabinet, letting it rest on the frame below, a... | |
| Mods for Avantgarde speakers I have the Duo Omega G2. What if I simply remove the bass cabinet from the stand frame and put it on the floor, adjusting it back to time align the tweeter in the bass cabinet with the midrange horn? Has anyone tried that? The tweeter horn will th... |