ramtubes
Responses from ramtubes
| RIAA, Questions only please @imhififan Thank you very muchAbout the most complete article I have read so far that at least makes majority of sense and is somewhat easier to understand for the layman imho.Still living and learning. Im still learning too. That's the most re... | |
| RIAA, Questions only please @imhififan http://hifisonix.com/wordpress/wp-content/uploads/2018/01/Disc-Recording-Equalization-Demystified.pd...Thanks for sharing this. We need more of you finding articles of quality. As you can see the author found the subject difficult too... | |
| RIAA, Questions only please @johnss with all the discussion on the RIAA curve, would suggest real vinyl philes consider the following; test your LP playback set up and see if the playback response is flat according to the RIAA spectheres more to this . Thanks for the write... | |
| RIAA, Questions only please @rauliruegas Please also refer to the graph near the top of Mr. Galo’s excellent article called Figure 1; http://www.smartdev.com/RIAA.htmlIt refers to this graph as the “typical” RIAA response; in reality, it is far from the “ideal” response th... | |
| RIAA, Questions only please @rauliruegas @ramtubes : What is the purpose or your target on both OP's threads?I'm asking because today 99.90% of all cartridges we audiophiles own are magnetic ones and the 99.95% of all the phono stages we own or are manufactured comes with ... | |
| RIAA, Questions only please @cto517 On a thread like this I am looking to learn. FWIW - I find the available online documentation for RIAA inconsistent, confusing, misleading, incorrect data .. no wonder, imo, it is difficult to grasp when we have experts like yourself cont... | |
| RIAA, Questions only please Here is something to consider. What if we didnt use RIAA or any EQ in making a record. If we recorded a constant voltage sweep from 20 to 20Khz and looked at it under a microscope what might we see? When we played the final product what would a vo... | |
| RIAA, Questions only please @rauliruegas I'm an analog lover and MUSIC lover I am curious how you avoid both digital and vinyl. That leaves tape. | |
| RIAA, Questions only please sorry I didnt know about Locking. However, in my opinion the original thread was an embarassment to all. To take a simple technical question/concept and bury it, as it had been, with opinion, off topic commentary and an argument between myself and... | |
| RIAA, Questions only please At this rate I doubt this post will last long. We are already off topic. Sorry if you miss the old post. Several members posted such long and confucing replies I could hardly get through them myself. I have nothing to gain here. Im not going to wi... | |
| RIAA, Questions only please @cleeds I agree. I followed the thread closely, even though I never commented in it. It's unfortunate that now no one can follow that discussion. I am glad you were following the thread. I am happy to keep it going here if we can get on track a... | |
| RIAA, Questions only please @test It's too bad that the previous thread is now locked as it contained a lot of insightful and useful information. I personally get more from a discussion than I do from a lecture. The problem with the previous thread is that is that the beh... | |
| Tube Question for Audiophriends This tube is simply a high gm pentode (much like a 6922). https://frank.pocnet.net/sheets/009/e/E280F.pdfFrom the genus white paper it is being used triode connected to drive a larger output tube. Nothing special going on here. Lets get used to th... | |
| Does anyone care to ask an amplifier designer a technical question? My door is open. can you find the thread. I had no luck. | |
| MAC Autoformers? @toshkolPlease spell out an abbreviation the first time you use it. What is Le to you? Leakage inductance?Prove you wrong about what? Thats not what I am here for. :) |