ronnjay
Responses from ronnjay
| Toggle switch cleaning? Sorry for the double post. I now see how easy it can happen.Techni-Tool has a good assortment of contact cleaners including Caig products.http://www.techni-tool.com/categories/Electrical-Contact-Cleaners | |
| Toggle switch cleaning? WD-40....I wouldn't use that stuff on my garden rake!! | |
| Toggle switch cleaning? WD-40....I wouldn't use that stuff on my garden rake!! | |
| Gabriel Gold IC's are they really this good? Audiolab....I remember a post by you in 2013 or 2014 when you said you paid $600 for those JBLs. You bought them for the nice cabinets and were going to flip them. You better check your archives. | |
| Taralabs cables 4orreal,Yes, it's a copy and paste from Tara Labs white paper on the third in a series of cable design. Wouldn't one think a credit is due naming its source? Might prevent a legal issue in the future. | |
| Taralabs cables Zephyr24069,Turn off, you bet. Fully agree ++1ron | |
| Gabriel Gold IC's are they really this good? Hi Steve,You would think a moderator would recognize a long post with its glossy salesmanship wording as a copy and paste and simply not post it. Especially from certain recognized posters. | |
| Building the Audio Note Kit 1 SET amp... Al, thanks, I see that pages 4&5 of section 7 of the manual that you referenced above show physically larger caps in the C1-C4 positions. Without rereading a lot of the thread, I don't know what symptoms are being experienced other than guessi... | |
| Building the Audio Note Kit 1 SET amp... Rebbi,Where in the circuit are the caps C1 thru C4? Since the silk screen on the board shows a physically much larger size cap for those four, did they modify the original circuit or simply send you the four mylar caps by mistake. Good luck, you'r... | |
| Taralabs cables Jmcgrogan2,Yes, I remember that post from a year ago. I'm still waiting too for Alab to actually listen and compare the two cables. BTW, in that last copy and post about Tara cables they can't be both 85 square millimeters and 85000 square millime... | |
| Best speaker Cable matching Wilson Audio Sasha I think the thread you are thinking of is this one;http://forum.audiogon.com/cgi-bin/fr.pl?fcabl&1419362396 | |
| Anyone using TARA Labs Evolution? Maybe you should look more closely into the magazine or maybe you shouldn't believe everything you hear from Tara or just maybe they don't meet the five dealer requirement set by Stereophile. | |
| High Fidelity Cables CT-1designed by Rick Schultz Ddraudt, Thanks for the reminder, I will call Rick for his insight. | |
| High Fidelity Cables CT-1designed by Rick Schultz Ddraudt, It appears the CT-1UR was in correctly, the output is the south facing pin. the input the north. I'll listen to my CT-1E for a while then switch back to the CT-1UR. Thanks for your help. | |
| High Fidelity Cables CT-1designed by Rick Schultz Ddraudt, Thanks, I too was thinking that would be the case by going to a CT-1UR from a 1E. I will check the magnetic polarity for proper direction. However remember this is a single cable in a digital connection (SPDIF) from Esoteric transport to ... |