Not everyone can afford luxury products and that is just the way it works of course you can find cables that are much less expensive than this that is what you should be looking for.
18 responses Add your response
Well - it would appear that they offer some interesting cable geometries. But this one I know personally. Noise Suppressing Coil technology http://www.ansuz-acoustics.com/index.php/cables/ansuz-cables Having said that, you can make you own IC’s, Speaker Cables and Mains Cables with that very same geometry for a fraction of the cost and it’s pretty easy... http://image99.net/blog/files/4127b5fe2694586e383104364360373b-74.html http://image99.net/blog/files/d048bbacfce9bcad4a025be804771d9a-76.html http://image99.net/blog/files/be8de0c383c5434907610d6b55049e69-75.html They are ultra quiet cables that offer superb imaging, fast dynamics and stunning clarity I have them throughout my system and they work extremely well. Dare I compare them to Ansuz? Only the geometry - their materials are ridiculously expensive, plus thay have a couple of other features the Helix cables do not Cheers |
A coiled cable acts like a choke or an inductor. Similar to air core inductors in many speaker crossovers. This will filter out high frequencies and result in rolled off high frequencies in your audio. This is not desirable for high fidelity. Ferrite beads can achieve simlar results. If Ansuz can get away with charging 35k for such bogus benefits available elsewhere at little or no cost then consider it an idiot tax on those who have more money than sense. |
@shadorne - re: .... A coiled cable acts like a choke or an inductor. Similar to air core inductors in many speaker crossovers. This will filter out high frequencies and result in rolled off high frequencies in your audio.You are correct - however -the amount of inductance and it’s effect on the audio signal is related to the diameter of the coil, number of windings and the spacing of the coil windings. Also, the coils (i.e. in my helix design) has the signal wire passing through the centre of it - doesn’t that make it more like a transformer? - does that have an effect on the overall inductance? I cannot talk to the Ansuz cables, but I can say with certainty that the coil on my Helix design is designed such that it has no effect on the high frequencies. Others I have consulted with confirm the inductance at play would not effect the audible frequency range. Also, if you look at my helix design you will note the twisted neutral. This, together with the coil spacing and coil diameter I believe reduces the overall effect of inductance from the coil to very low levels. My helix cables are the most detailed and well balanced cables I have ever tried and they stack up to some very pricey competition - top end is definitely not an issue. Don’t get me wrong - $35k is far too much for speaker cables in my book, but the Helix geometry works extremely well - if implemented correctly. Regards |
I auditioned Raidho D3's with Ansuz D-TC speaker cables, cables were impressive. Due to the high cost of the D-TC's I went with Ansuz Diamond, I have a good sound but would like to upgrade at some stage. Upgrading the power cord on my Audio Research GSPre to Ansuz Ceramic is very audible. I am new to this HiFi world and was skeptical at first, I played safe with Ceramic, now that I'm comfortable, my future power upgrades will be Diamond. (Longer cable length recommended). I have Transparent Ultra cables on my first system but went with Ansuz, as Raidho demo their higher end speakers with them. Transparent higher end cables are very expensive also, (Reference/ Opus). If the opportunity arises, have a listen to D-TC speaker cables. |

