agree with bill - when you get it, get the very inexpensive, but great upgrade to the 3D ....the 2nd pivot.
HELP PLEASE - VPI Classic Signature 3D Arm or Dr. Feickert Woodpecker Jelco Arm
Need some help guys from the well informed analog folks.
VPI Classic Signature w/3D arm - New Open Box - Soundsmith Carman MKII Cart is brand new
or
Dr. Feickert Woodpecker Jelco arm static demo - Dynavector 20x2 Cart is brand new
Both tables are either static demo’s or open box and mint and from reputable dealers the carts are brand new and will be mounted for me.
Both are around $4,400 price all in.
I’m open to other options but landed on these two for best for the price I thought and these are the carts for this price target that each dealer can offer. Trying to not make things too crazy option wise but I always get great info from you guys so please share any and all thoughts. What one would you get? Either?
Here in my situation:
I just finished up a full system re-fit with some tweaking here and there still to do but I am extremely happy with the sound I’m getting today from my new to me system.
Best I’ve personally ever had. I’m pretty psyched - so psyched I want to add a turntable and a decent / competent but reasonable priced cart to startout and then if needed I can upgrade later.
Will these tables have a legit chance to be at least as good as my Digital do you think?
Could they sound better or no chance? Everyone says vinyl is better when using decent enough equipment so I’ll list the rest of my rig below to get your opinions.
Would love some feedback / ideas / thought recommendations and help. I’m a digital guy and want to give vinyl and honest to goodness try.
For my phonostage I just purchased the dual mono Phono board modules for my
Mark Levinson No.326s linestage so it’s now a full function Preamp with built in phonostage as well which was done at a reasonable cost which is great!
Here is some other info that may be relevant. Thanks so much for the help!
** Back Ground info**
** Room is **
14 x 24 w/Cathedral Ceilings - 16 Foot a peak
** Music likes **
Assorted Music but no metal or loud hard rock anymore really - not much Large Scale classical either but everything else. I listen just loud enough to sound its best but not a loud listener. I enjoy normal levels.
** Likes / Priorities **
Transparency - Delicacy - Linear - High resolution - microscope but not sterile not etched or lifeless -some natural warmth and life to the music is key but love that see through transparency and love precise soundstage - remove as many layers without being clinical - tight bass - hate flab - but don’t need worlds greatest slam but love speed and accurate bass while being musical.
** Perspective **
I’m only a couple months into this new system and I was struggling to get the right Preamp and tried a half dozen or so searching for the right balance and the one that could bring my new system together like only the perfect matching preamp can do. Each system is different so really it must be heard to know it’s what you want. I believe in the Preamp and knew If I could find the right match it would change everything. Well that was the hope.
To make a long story longer the Mark Levinson No.326s preamp did this and more. I was hedging my expectations based on the disappointments of the others I tried and failed but the No. 326s nailed it and honestly it an incredible Preamp and then some. I was so happy I decided to upgrade and add the built in phonostage option and here we are :)
System:
https://systems.audiogon.com/systems/5160
- Magico S5 Loudspeakers
- Pass Labs X350.5 Amplifier
- Mark Levinson No.326s Preamp/phonostage
- Bricasti M1 Special Edition DAC
- PS Audio P10 Power Plant
- Kubala-Sosna Emotion SC’s
- Nordost/Cardas IC’s
- Assorted PC's Verastarr/Cardas
- Digital PC based front end that I have been tweaking and evolving:
- Sonore microRendu 1.4
- Full Suite of UpTone Audio Gear
(2) x LPS-1 Ultra Capacitor PS
JS-2 Linear Power Supply
(2) Regens - ISO/Amber
- (8) Canare / Oyide DC cables
- (2) Breeze Audio 12v LPS
- Tellurium Q Black Diamond Reference USB cable
- Curious Regen Link USB Cable.
This Digital Front End beat out: Lumin, Antipodes, Naim and Auralic servers. It needs everything to work so well but man does it work great. My hope is that a turntable can complete and wish some luck I end up liking it better. That’s why I’m asking for help. I want to put my best vinyl foot forward for the budget it listed as I already own the Phonostage so my budget is for table, arm and cart.
Really appreciate any help you can provide! I know this is kind of long but wanted you guys to know where I’m coming from! If you would like more info please let me know - all comments and feedback are most welcome and deeply appreciated :)
VPI Classic Signature w/3D arm - New Open Box - Soundsmith Carman MKII Cart is brand new
or
Dr. Feickert Woodpecker Jelco arm static demo - Dynavector 20x2 Cart is brand new
Both tables are either static demo’s or open box and mint and from reputable dealers the carts are brand new and will be mounted for me.
Both are around $4,400 price all in.
I’m open to other options but landed on these two for best for the price I thought and these are the carts for this price target that each dealer can offer. Trying to not make things too crazy option wise but I always get great info from you guys so please share any and all thoughts. What one would you get? Either?
Here in my situation:
I just finished up a full system re-fit with some tweaking here and there still to do but I am extremely happy with the sound I’m getting today from my new to me system.
Best I’ve personally ever had. I’m pretty psyched - so psyched I want to add a turntable and a decent / competent but reasonable priced cart to startout and then if needed I can upgrade later.
Will these tables have a legit chance to be at least as good as my Digital do you think?
Could they sound better or no chance? Everyone says vinyl is better when using decent enough equipment so I’ll list the rest of my rig below to get your opinions.
Would love some feedback / ideas / thought recommendations and help. I’m a digital guy and want to give vinyl and honest to goodness try.
For my phonostage I just purchased the dual mono Phono board modules for my
Mark Levinson No.326s linestage so it’s now a full function Preamp with built in phonostage as well which was done at a reasonable cost which is great!
Here is some other info that may be relevant. Thanks so much for the help!
** Back Ground info**
** Room is **
14 x 24 w/Cathedral Ceilings - 16 Foot a peak
** Music likes **
Assorted Music but no metal or loud hard rock anymore really - not much Large Scale classical either but everything else. I listen just loud enough to sound its best but not a loud listener. I enjoy normal levels.
** Likes / Priorities **
Transparency - Delicacy - Linear - High resolution - microscope but not sterile not etched or lifeless -some natural warmth and life to the music is key but love that see through transparency and love precise soundstage - remove as many layers without being clinical - tight bass - hate flab - but don’t need worlds greatest slam but love speed and accurate bass while being musical.
** Perspective **
I’m only a couple months into this new system and I was struggling to get the right Preamp and tried a half dozen or so searching for the right balance and the one that could bring my new system together like only the perfect matching preamp can do. Each system is different so really it must be heard to know it’s what you want. I believe in the Preamp and knew If I could find the right match it would change everything. Well that was the hope.
To make a long story longer the Mark Levinson No.326s preamp did this and more. I was hedging my expectations based on the disappointments of the others I tried and failed but the No. 326s nailed it and honestly it an incredible Preamp and then some. I was so happy I decided to upgrade and add the built in phonostage option and here we are :)
System:
https://systems.audiogon.com/systems/5160
- Magico S5 Loudspeakers
- Pass Labs X350.5 Amplifier
- Mark Levinson No.326s Preamp/phonostage
- Bricasti M1 Special Edition DAC
- PS Audio P10 Power Plant
- Kubala-Sosna Emotion SC’s
- Nordost/Cardas IC’s
- Assorted PC's Verastarr/Cardas
- Digital PC based front end that I have been tweaking and evolving:
- Sonore microRendu 1.4
- Full Suite of UpTone Audio Gear
(2) x LPS-1 Ultra Capacitor PS
JS-2 Linear Power Supply
(2) Regens - ISO/Amber
- (8) Canare / Oyide DC cables
- (2) Breeze Audio 12v LPS
- Tellurium Q Black Diamond Reference USB cable
- Curious Regen Link USB Cable.
This Digital Front End beat out: Lumin, Antipodes, Naim and Auralic servers. It needs everything to work so well but man does it work great. My hope is that a turntable can complete and wish some luck I end up liking it better. That’s why I’m asking for help. I want to put my best vinyl foot forward for the budget it listed as I already own the Phonostage so my budget is for table, arm and cart.
Really appreciate any help you can provide! I know this is kind of long but wanted you guys to know where I’m coming from! If you would like more info please let me know - all comments and feedback are most welcome and deeply appreciated :)