High Fidelity Cables MC 1-PRO


Just plugged it into my system yesterday. So it only has about 10 hours on it. First impressions The sound became more detailed in the mid range really opens up nice. (not harsh or lean). The base is tighter but not as deep as before. I experience the same base problem when i started breaking in High Fidelity MC 6 Hemisphere. The base with the Hemisphere took a long while, but came in great (Better than orginal) after it had 500 plus hours on it. So for now i am not worried about that. Since High Fidelity recommends about 400 hours before the MC 1 Pro settles in. The sound stage as a whole is much more defined feels sound like it has more energy, but it did shrink a little again i feel this will get better than it was with reaching the 400 hour mark. I am very happy with the over all sound my systems has since adding the MC 1-Pro and thinking about adding another one.
I did plug the MC 1-PRO in at the wall with my 21 MC 0.5s all on the same line that feeds the MC 6 Hemisphere. Which feeds my front end, TV and Sat. box. i all so have 6 MC 0.5 plugged into the Hemisphere. The Pro and the MC 0,5s sound very good together and a nice match up. Will report more as i get more time on the MC 1 PRO.
enjoy Pete
68pete
I was so happy with 1 MC Pros and 17 MC O5s on 1 outlet so added a 2nd MC Pro. .   Good stuff!!!
slaw
The pro 1s are great,  combined with the MC O5s they are even better. As you know their is a big price difference between the two, with the Pro 1s cost a lot more than a MC O5 so the price point makes that a hard question to answer. The physical make up and size different all. so play a part in it  You can not go wrong with either one and they do compliment each other.The Pro 1s are very good.
I’m a believer and user of the 0.5s. My question would be, if one was to start from scratch, would the sonic/monetary benefits be had by going to the pros first?
My audio system is gone!!!
My speakers disappeared a while back but now there is no system.

I added a 3rd and 4th MC-1 Pro to my system and let them play constantly for a week or more. 
the results of 4 MC PROs is uncanny, miraculous, spell binding.
I can no longer detect component coloration but simply musical performances floating in my room.
On the best recordings, I can hear no flaws, which is a first for me.
The listening team describes the sound as immersive, entrancing, hypnotic, pure, holographic at a previously undiscovered level.
It's hard to describe the sense of REAL.
Dead silent background, Image as solid as a rock. Richer and fuller than ever before. Tone so natural that it redefines my understanding of that term. the bass is extended, more powerful and better defined.
the highs are cleaner clearer, smoother, more detailed, real and effortless.
The mids' are like being there.
The MC Pros appear to make a bigger improvement than many of my more expensive HFC jewels. This could be the one!!!
     Joecasey and others considering adding MC Pros.
Go For It!!!


68pete,
Thinking adding 2nd MC1 Pro.   I have MC1 Pro and MC 0.5s in one outlet.
68pete,

~50 hours on MC1 Pro now and sound is more organic and opened.   Improvements are different than MC 0.5s.

68pete,

For the moment, I have removed all of my MC-0.5's (20) and the 2 MC 1 Pro's. I need to get a baseline before I plug them all back in.

ozzy
mountz
I have one at the wall with a Pro Power cord that feeds the Hemisphere and it is great. 
Has anyone tried the pro at the outlet with a hemispher conditioner? I would like to hear your feedback since Rick has them on sale.
Hi joecasey
It only gets better with time.

Ozzy Call Rick at High Fidelity cables he will help you out, very easy to talk to. 
I have a MC 1 Pro plugged into one outlet along with my daisy chained MC 0.5s. I didn’t experienced any MC 0.5 2nd day darkness or hardness.

It sounds little tight 1st couple days but never bad. I have ~20 hours now and opening up nicely. My SS preamp is on 24/7 ... sounds pretty good now and if continues improving to 300 hours, I can’t wait. :-)
Hi ozzy
Yes Rick told me about 400 hours is when it is at its best. The one i am using took about 300 plus before it is really good. For me it was the base that was lacking for a while, but did get much better over time. I used it at the wall with the Pro power cord feeding my MC 6 Hemisphere and have everything plugged into it include the tv and sat box. so if the stereo system was not on the tv was on so the hours went by quickly. You do not want to defeat the ground on it. I unplugged one of the MC O5s and plugged in a very short power cord with a 3 to 1 splitter on it and add the Mc O5 and the Pro 1 to it and plugged it back in the same spot the MC O5 came from. It has made a nice improvement in my system.
68pete,

Thanks for the reply.
That amount of playing time will take over 2 months! Are you sure about this?

ozzy
Hello ozzy
The plug in time with not being used mean nothing. Its the playing time that you want and you need about 300 to 400 hours. They should settle down at that point. Yes they will not sound good for a while, but they come around.
The 2 MC 1 Pro’s that I have sure make the treble sound glassy.
I have maybe 190 hours on them just being plugged in. The actual music time is much less. Is this hardness expected during breakin?

ozzy
I don't have a Pro 1 but I own and use most other HFC higher end cables, 0.5's, MC-6 and Hemisphere. I would think the best place to plug in the Pro would be the wall outlet. I've been told it's somewhat different than the 0.5's and works best from the wall outlet. With that said there's absolutely nothing wrong with experimentation ;-)
Good morning...

New to this forum, but not to HFC. I have 2 Reveal PC's, an Enhanced PC, a Hemisphere, 7-0.5's, and Reveal speaker cables. Will be buying an MC-1 Pro later this month. 

I was wanting to know if anyone has plugged an MC-1 Pro into their Hemisphere, and if so, the impressions....

I know the wall is MUCH better for 0.5's, but I am really wanting to put this in the Hemi on the same plug with my amp. 

Thoughts from you veterans??    
I've been told that one has to use the Pro in an active system for break-in to occur.
Hi ozzy
Glad to hear you got through the surgery. do not rush the arm and do all of the physical therapy they give you for it. I believe just like the MC O5's you must be using the Pro's to break them in.
Thanks, 3 days after surgery now. I can' believe how difficult it is to use just my left arm.
I was able to plug 2 of the Pro's in. One for digital and one for analog yesterday.

I will post more after a few more days of breakin. Does just having them plugged in to the main outlet's count towards breakin time ?

ozzy
Post removed 
@ozzy, I hope all goes well with the surgery and I wish you a speedy recovery! Remember, I could assist you when you are up to it...no problem!
68pete,

Thanks for the information. I'm going to try a couple of the Pro's. Hopefully I will get them Monday.

However, in a few hours I am scheduled for shoulder surgery (rotator cuff, bicep repair). So I'm not sure how well or how soon I will be able to get behind the rack to plug them in.

ozzy
Hello ozzy
I asked High Fidelity your question? The MC 1 pro would function but not as well with the ground missing and would be more like a powerful  MC O5. The MC O 5 would work ok. Hope this helps
Pete
Does anyone know whether the ground pin on the MC1 Pro or the MC-05 for that matter is actually used in the design?
In other words if it is plugged into a non grounded or 2 prong socket would it still be as effective?

ozzy
Thanks, tommylion, I do read the E-Mat thread also :-)
I'm keeping an open mind, possibily there is a gradual improvement that I won't realize until I remove the E-Mat?
lak,

I don't know the answer from personal experience, as I  haven't removed any of my mats after placing them. Others have said in the mat thread that the effect does linger a while when they are removed.
@tommylion,
No, just my breaker panel.
Today makes two weeks in the same location so maybe after today when I do some additional listening I'll detect something.
BTW; can anyone tell me when I remove the E-Mat if it was doing something that I missed over the two week period in the breaker box, would removeing it give me an emidate difference in sound, or does it take a while?
lak,

do you by any chance have ERS cloth on or around you breaker panel? It seems from ozzy’s experience that the cloth can interfere with the effect of the mat. Also, Bybee QSEs and iQSEs don’t mix well with the mat.
68pete my breaker panel box is in the same room as system # 2 (20 feet of 10 gauge wire) and system # 1 (30 feet of 10 gauge wire).
davidpritchard and lak
How far are your breaker panel boxes from the equipment? Could distance have anything to do with the different results?
Hi All, I know the MC PRO is a winner as my 2 have brought me 2 levels closer to audio Nirvana. I'm hearing soundstage imaging that I didn't know was possible.
Ozzy- I have 16 of the MC-0.5s and the first MC PRO blew the sound away. I think the 05s are great! They don't give you what the PRO does.
I hope you do try one and let us know what you think.
They do take a week or more to be fully engaged.
Enjoy the music
D
lak:

Very interesting that there is no change in the sound but I know you gave the Omega E Mat a fair audition. I do hope you will return it for a refund.

David Pritchard
FYI @davidpritchard from your suggestion on another Audiogon Forum I've had the E-Mat in my main breaker panel (three other locations previously) for two weeks as of tomorrow 8/20/2018, still waiting to hear an improvement.
68pete, lak, davidpritchard,

Thanks for the comments. I think I am going to try a MC1 Pro.

ozzy

Concerning the Omega E Mats, I have them installed in three different systems in two different houses. I have found that one E Mat placed in the Circuit breaker box improves the sound of any system fed by that breaker box. I think most systems would benefit from an E Mat at this location.

And since it is a one minute installation and comes with a 30  day trial, I think it is a fun experiment to perform.


David Pritchard
Although I have not tried or heard the MC 1 Pro that's the route I'd recommend especially since you like the MC-0.5's.
I've demoed one E-Mat for about 30 days and although many report excellent results with it, I've not heard any improvement in my systems.
Seems like a lot of money for a single E-Mat ($600) and the suggestions from the audiophiles that have good results seems to be you need more than one E-Mat...
ozzy
I do not know about the Omega mats (thinking about trying one). The MC 1 Pro is very good. If you liked the MC O.5s you will love the MC 1 Pro. The MC 1 Pro works well with the MC O.5s and will not disappoint. For me the MC O.5s did not take long to break in 20 hours maybe where the MC 1 Pro will be a lot more, but well worth it. With out a doubt a step up in sound across the board. Both the Mat and the Pro offer 30 day trial periods.
Pete
Question:

Has anyone compared the results of the MC Pro 1 to the benefit of using 2 of the Omega mats?

Both of these items are intriguing but my budget has only room for one of these items. I already have 20 of the MC-.05’s spread out over my 3 dedicated lines.

ozzy
I agree! The MC Pros are fantastic!!
My second MC Pro made as substantial an improvement as the first.
More intimate and revealing, more musical and clean, more real.
Smoother at higher volumes, better clarity and soundstage presents.
It would not surprise me if the MC 1 PRO did become the most popular item at HFC.
Now I must wonder what 3 or 4 MC 1 PROs would sound like in my system.
I recently added 2 MC-1 Pros to my system. WOW, what a difference they made. I agree with a post above (tgun5) that HFC is kind of underplaying the significant effect they will have on a system. I am not a new comer to the magnets, I have a full system of HFC products. The MC-1 Pro is just a different animal compared to other HFC products. The MC-1 Pro gave me more of a performance boost then when I added 2 Helix power cables to my system. The MC-1 Pros added more detail, accuracy, richness and realism to the music in a large way. Better bass and a wider more defined soundstage. I was not expecting this level of performance increase given all of the other HFC cables that are in my system. Believe it, more magnets = more music !

To anyone out there wondering which HFC product to buy first, I can say without hesitation the MC-1 Pro. Start there and experience the true benefits of magnets. This technology is a game changer.
lak,

Wow! Holy crap!
I’ll watch for a used one when it gets below $1000.

ozzy
Superb, system-altering products keep coming from Rick Schultz. This is no minor improvement and it's effects are almost undersold on the website. I too, replaced one of my MC-05's in a chain of 12 to the MC-1 Pro. I was astounded by the overall change for the better - as described perfectly by everyone here. The only caveat is that, like the description says, - this sucked the life out of my sound for about an hour. I actually removed it twice out of disappointment and then just decided to ride it out. Glad I did! (and I should have known)

Not only are the products great but so are the people at HFC. Thanks Rick, Casey, Joey, and Kristi