2. analog
  3. 1013148749

Hum a problem with Planar 25/ Grado cartridge?

Disappointed with Planar 25/Elys combination. Dealer said cartridge needs break-in period of a couple of weeks. Have always preferred Grados but understand there to be a hum problem with this combination and not with the Rega cartridges. Ideas about Rega carts vs Grado and the hum?
celtic66
marakanetz's avatar
marakanetz
5,473 posts
 
From my experience, Grado will produce a hum with Rega.
Using Rega carts do not use three point mounting. Use the standard alighnment procedure with two-point mounting.
For the best cartridge setup advice go to www.turntablebasics.com
elorian
24 posts
 
FWIW, I'm currently running a P25 with a Dynavector 17d2 MkII cart and have had no problems with hum (very low output mc).
g_m_c
443 posts
 

Have a 25 mounted with a super elys, very happy with it.

Have also heard to avoid grado with a rega.

Have heard that dynavector is a good match with rega.
mrowlands
54 posts
 
Your dealer is probably right about the break-in. You can speed up this process with the Cardas Sweep and Burn-In record, but follow the instructions (check out their web site).
lazarus28
339 posts
 
dynavector/rega are *great* together. very highly recommended.
More to discover