lessloss blackbody

Dear all,

my I introduce myself? My name is Rainer Weber and I am the Technical Director of Kaiser Acoustics (see www.kaiser-acoustics.com). Maybe you have noticed the Kawero! speakers we produce at RMAF or CES.

My system consist of the following items:
Oyaide Power distribution block
Echole Cables
VertexAQ Platforms and Power Conditioners
Holger Stein (www.steinmusic.de) tuning feet and auxillaries

GTE Trinity DAC and AMP
Weiss Vesta Firewire to SP/DIF converter
xxhighend software
dedicated music PC

Mastersound 845 Monobloacks signature edition
Absolare Pure Tube preamp
Kuzma Stabi XL4 with 4point arm
My Sonic Lab cartridge

Kaiser Kawero speaker

and a lot of room acoustic treatment. You can see a pic on our webpage (I have to update to a recent one)

Meanwhile I have 7 Blackbodies in the system. The work fantastic and I have to admitt that even the step from 6 to 7 is very cleary audible.

In my system they work very well in the vicinity of the power section of the devices I use. Also near the power distribution block is a very good place to set it.

Even on top of our external tweeter housing (made from very rigid and inert bullet proof "tankwood" the improvement was audible. I removed it here because of design issues.

With 7 BB I achieve now a more equally improvement, that means just moving one BB does not completly disturb the effects:

Coming to the effects:
-Better timing
-Better transients
-More Clarity
-Less shouting on high volumes
-No loss of staging, articulation and involvement on lower levels
- sound stage is incredible increased in the depth and has very solid focus in the depth
All this is typical for less RFI and EMI interference.

Everybody who wants to listen to the system and the Blackbodies is welcome to visit me in Regensburg/Germany.

Best regards

Rainer Weber

Dear all,

thank you for the nice response concerning my showroom.

Regarding the PC:
I run xxhighend (www.xxhighend.nl) as a software memory player. The PC is a tweaked laptop with 1TB harddrive and no other services but music. All USB, WIFI and Ethernet is shut down. I will design a proper power supply soon for this(linear regulation no switching anymore)

I have 4 Steinmusic H2 (two variant A and two variant B) in the showroom. I think the Lessloss BB is better in optimazing the "tone colours" or "secondary harmonics" whereas the H2 are phenomenal in improving the soundstage.

In general both improve a lot and I would not like to remove one item. The steinmusic effect is adjustable by a pot. Be careful: Too much is too much and the sound is a little artificial then.
The Lessloss performance increases and increases when you add another BB. Until now I have not seen the limit of BB units where you say whne adding another one it is not an improvement or even worse it is too much of the BB.

I hope this helps.

Best regards

Rainer