Louder Hum from amp and Thump, thump sound spkrs


Hello.

I have a Pass X-350.5 and Wadia 861. Not using a preamp.

Last week had the system on but not playing at the time. There was a brief electric outage and then the CD player was playing.

So I powered down and everything seemed alright.

When powered up my Pass amp was humming a little louder than normal. I played a CD and was OK.

Now when shut off Pass X-350.5 amp there is delayed loud thump sound coming out of each speaker. First a thum sound from the left speaker and then a split second from the right speaker.

Did that little electrical outage damage my amp or CD player?

Why now I am getting a louder than usual HUM coming from amp?

Also, the double thump sound? I tried different cables, new fuses and still results remain the same.

How can I resolve? Any future precautions?
Thank you very much.
Joe
joefama
Joefama, wow....that's a discovery. Glad you found the cause. Hope everything is fine and no further damage was done.
It turned out to be a defective michael wolff cable that was causing the hum. Very shotty termination and very disappointing on the quality of the cable. I bought this cable on ebay and paid only $38 with shipping. After seeing what the cable is made of internally , I overpaid.
Joe,
how brief was the outage?
When the power returned, was the amp on?
Have you tried switching the amp off? Not by turning it off with a front button, that's the stand-by. There is a switch in the back of the amp. First turn the amp into stand-by with a front panel button, then flip that magnetic breaker switch on the back of the amp down. By doing that you will let the amplifier power supply capacitors completely discharge. I would also take the power cord out of the wall after the magnetic breaker is turned down. It will take hours to completely discharge. I'd leave it like that overnight or for about 8 hours. You'll see the blue LED stand-by light on the front meter still will be lit even after you flipped the back switch off. That's normal because the caps are still charged and the LED will go out in a while.

Then with your CD player off, flip the magnetic switch on the back of the amp up and let it charge for few hours(2-3 hours should do) and don't play music. After about 2-3 hours turn the amp on and play some tunes. Then power down and see if the problem went away. If not, I'd recommend calling Pass customer service.

Also, I don't think you should hear any hum from the amp anyway. I don't get it with my X250.5 and your X350.5 should not do that either. Talk to them about the hum. It may be your cable TV near by your system and you may need a ground loop isolator. But mention the hum noise to Pass tech as well....see what they say. Please keep us updated as I am very curious about the outcome. thanks.......
if you shut off cdp, do you still have the thumping when powering down amps? if not the cdp is ok. is the overall sound/performance changed at all? i keep all my gear on at all times, i have a preamp and donte even put that into standby. unless the manufactures specifically reccomends against leaving on, i would...youll enjoy this little tweak as "warm up" time is greatly reduced