NEW Cerious Technologies Upgrade - Graphene Matrix Cables
Calloway , I had symular issues with my component stand and an area rug where I had to station the rack further out from the wall onto an antique area rug , long story , spouse involved,..... Anyone using the Graphene Matrix Damping Square interconnects? If so what were you using prior to the change ,? |
in_shore...i had to send my 3' Matrix pcs back because i could not make them bend enough to make a 12" distance connection. i have emailed Bob to see whether a 4'-5' pc will turn a loop quick enough to make that connection.I hope it will..i have Matrix speaker cables coming very soon. The interconnects are amazing.. |
Lancelock I may do changes with wire in my system this new year and will consider Cerious . I have a collective mishmash of power cords some of which are twenty years old like XLO , Signal Cable and the stiffest pair are Shunyata Taipan . Like most I had notable changes in sound quality trying different brands of wire however these changes in sound were mostly with interconnects and speaker wire , power cords not so much except one , I thought to mention this because I noticed you use Bernings amp .The old Shunyata Taipan power cord reacted well with David Bernings Siegfried amps I had years ago , it was incredible how much noise that amp through off and how effective this particular power cord was especially reducing the noise floor , it was huge . Berning had a little headphone amplifier back then that reacted the same way with the Tiapan power cord . That was the only time I experienced such a shift in performance using any power cord on any other components I tried with , going through the Shunyata line of ac wire on my other components had subtle effect to none , nothing anywhere close to what the Tiapan did for the Berning amps. |
Well, I used two (CM) lengths. But Bob would probably make you up a short jumper set. It may not be exactly like the Matrix though because there probably isn’t enough room to fit in all of the ingredients. Or perhaps just buy an additional Cerious Graphene cable (CT) and use that as a jumper for the bass? ozzy |
My pair of Matrix interconnects continue to improve (even after coming off the cable cooker for 136 hours) I really like them as stated above. I'd like to hear more about the Matrix power cords, especially from those of you that have them and can compare them to the various High Feditity power cords and the Furutech SO22N (14 gauge) and DPS-4 (11 gauge) power cords. |
Got my first shipment of the new GM cables today. Two pairs of XLR GM interconnects and one pair of GM speaker cables. The second shipment is coming tomorrow and a GM XLR digital cable and the second pair of GM speaker cables. I only installed the GM interconnects - 9 hours on them as of now. These cables are insane. It is new now but the level of details, instrument timbre and decay, imaging and sound stage are already shattered my expectations. I have went through tons of cables, the highest end ones I own were Nosdost Valhalla, before that AQ SKY and Redwood and before that Kimber silver stuff. Those were replaced by the GE cables by Bob. And my system sounds better than ever before. Now the GM cables (only the interconnects at this time), stone cold, 9 hours into the system is giving me organic gains that is - wow. I mean wow. Blew me away. It seems Bob is charging a lot more this time, compare to the GE cables - well, he is, but I do not think I am overpaying at all. In fact, from the sound I get, as of now, before fully broken in, it is already worth every penny. Still a lot of money if you do a loom but I feel for the second time, in high end audio, I get what I pay for and then some, in cost to benefit ratio. (The first time was Kimber Kable KCAGs and 8TCs, back in the 90s). Will give you guys more feedback after the holidays. |
lak. Unless you want to sell your HF .. don’t do it. I agree with your thoughts exactly. Just a superb cable. Mine now about 15 hrs old, from a use standpoint, and gets better every night. Magic. I could not use the pc, however, due it’s stiffness and not being able to make the tight turn from wall to amps. Sad. Will try the speaker cables in the near future. |
After 130 hours of burn-in on my Audiodharma Cable Cooker, I inserted the 1.5/M RCA Matrix Interconnects into my secondary system this morning between my CJ Classic SE preamp and my CJ Classic Sixty SE amp. The Matrix replaced the Reval 1.5/M interconnects. The build, looks and feel of the Matrix Interconnects is excellent as well as the custom box and awesome packaging that Bob always delivers. I believe that my Matrix Interconnects need some additional time to breath and age but if you are looking for a high quality interconnect that looks as good as it sounds, look no farther! I'd put this interconnect up against any other I've ever heard. Believe me, it can hold it's own and then some! Great bass, very nice macro and micro details, handles piano, organ, violins etc very well. That's all I dare say at this time. Now I wonder what I would hear if I replaced my HF U interconnect between my Dac and Preamp? Darm Merry go round never stops, it just pauses for a while! |
i listened last night for about 3 hrs and initial thoughts are as follows....soundstage larger..much better deliniation of instruments within the soundstage.can hear instruments within the soundstage not prevoiously heard. vocals with much better consonant articulation. This compared to the HF cable..Very happy to this point.. |
@mac48025, I think both cables make a big impact vs already very good GE ICs and PCs. If I had to choose I would start with the ICs but that’s knowing I would get them all eventually. Today I just inserted the new Matrix cables into my second system with my Double Impacts. Wow! The DI’s reveal the cable changes in a big way. These cables are soooo freakin good! Lance |
mac48025....i just installed an RCA interconnect, last night, that replaced a HF CT-1UR, and already find it better than the HF...Bob says that right out of the box it is at 40% of what it will be after breaking in.i did get 2 of the Matrix pcs but unfortunately the stiffness of them precludes me from using them on my amps...just my thoughts.. |
Well with my DPS-4 I did use the Furutech FI-50 nano NCF connectors along with the nano liquid on the cable connections. To me, these DIY power cords bettered all other power cords that I have used before. They seem to work best on digital and other front end equipment. But, I have not yet tried Bob’s new Matrix power cords to compare. I would like to someday. ozzy |
Ok, I'm ready to pull the trigger on some Matrix cables but can't afford a full loom at this time. I need a new digital cable so I'm going to order the damping squared. I can either replace my High Fidelity CT-1's with the damping squared IC's or replace my Groneberg PC's with Matrix PC's. Any suggestions on which to get first? The Matrix speaker cables will have to wait until spring. Thanks. |
Hi Dave (calloway): I just got my CT Matrix ICs and AC cord today. I only installed the ICs for now. They replaced the CT graphene extremes. Holy s**t ! Bob's products are hands down the best bang for the buck in audio today. The fact that you preferred them over High Fidelity UR cables speaks volumes. Maybe now we don't need Deep Core after all? |
i received my Matrix i/c and power cords today..a day ahead of the expected delivery date...YEA..!!!...i installed the i/c initially and played 2 tracks before dinner and will wait until after watching TV to listen again...My initial impression of those 2 tracks is just amazingly positive.The improvement it made over the previous HF CT-1UR interconnect if profound. That 'right out of the box'..stay tuned... |
@maxima95 Good question. I have the Chinese knock off version of the rhodium plated carbon connectors on my DPS-4. I did use the Furutech nano liquid on the wire. https://www.ebay.com/itm/1-Set-Copper-Rhodium-Plated-US-AC-Power-Plug-Carbon-Fiber-Connector-Adapter... The Furutech NCF’s are probably better but how much I don’t know. I’ve had the NCF connectors on another cable that had previously used the standard FI-50’s and while the NCF’s were better I didn’t think they upgraded the performance with the amount of extra cost they incur. The NCF receptacles on the other hand are indeed worth the extra price compared to other Furutech receptacles. Just my experience and opinion. |
@t_ramey I'm not experimenting with my main system which has a full loom of U or UR HFC except for a few other Furutech power cords. In my secondary system, I have a Reval 1.5/M interconnect from my CJ Classic SE preamp to my CJ Classic Sixty SE amp, that's where I'm going to use the Matrix interconnect. Ozzy reported very good results replacing hir XLR Reveal interconnect with the Matrix. |
@lak Yes, I did try the DPS-4 on the tube integrated and while it is good the Matrix had much better definition and detail without losing any musicality. I can see though where some would be content with the DPS-4 as it doesn't do anything wrong really but when compared side by side with the Matrix it sounds a little smeared with some sibilance. I'd like to revisit it on the amp for another comparison though just to confirm. What ic's are you currently using? |
@t_ramey thanks for the feedback on the Matrix power cord. So you are using your Matrix power cord to power your Integrated tube amp? Did you have your Furutech DPS-4 on your Integrated tube amp also and the Matrix power cord is an improvement, just double checking? USPS will be delivering my Matrix RCA Interconnects today ;-) it's been a long week and a half wait, Bob must be busy filling orders! When they arrive I'll be putting them on my Audiodharama cable cooker for three days and then I'll report back. |
