New Von Schweikert VR SR4 mk11 Cream or Crap ???

Douglas_schroeder, regarding hooking up cable fr bottom to top module of the speaker, it was suggested by the dealer who sold me both cable and speaker. Well, will try both method of cabling and lets see what is the sonic different. Meanwhile has anybody compare between mk i and mk II? Happy listening

Hi guys, how is your speaker supported? on the spike provided? I noticed from Von Schweikert website Picture Gallery, most of his dealers dont use the spike. Anybody doing it different with better result? Happy Listening

Hi guys, pardon my ignorant question but I m confused with the biwiring issue for this speaker. I thought biwiring is a cable with 4 terminations at the end of the cable to be connected to the 4binding posts of the bass module or unless ur saying that the terminations are long enough to connect both the midrange and bass module . if that is correct As I understd it what ur describing is bicable with 2 different sets of cable. in either case wldnt u still need a jumper cable to connect the lower to the upper binding post of the bass module ?Happy listening tq

CORRECTION :
Hi guys, pardon my ignorant question but I m confused with the biwiring issue for this speaker. I thought biwiring is a cable with 4 terminations at the end of the cable to be connected to the 4binding posts of the bass module or unless ur saying that the terminations are long enough to connect both the midrange and bass module . As I understd it what ur describing is bicable with 2 different sets of cable. in either case wldnt u still need a jumper cable to connect the lower to the upper binding post of the bass module ?Happy listening tq

Gammajo, now I got it. You are basically using the jumper plate provided by the manufacturer. I believe it wld be better to change the jumper plate to a better jumper cable. I change mine to a Transparent jumper cable and its certainly better than the stock jumper plate. Happy listening tq

Gammajo, you mentioned that VR SR4 Mk11 is not much different from VR SR4 according to VS factory yet their website describe otherwise as stated below :
The resulting sonic improvements of the Mk2 design are not subtle and include the following benefits:

1. Greater clarity, transparency, and smoothness in the midrange from 100Hz to 4kHz.

2. More depth in the sound field, along with greater detail far back in the stage.

3. Seamless integration of the woofers, midrange, and tweeter units, comparable in coherency to Quad 989 electrostatic speakers.

4. Tighter bass response combined with sweeter treble.

5. Superior image focus, enabling you to almost reach out and touch the performer
Did u audition any VR4sr Mk11 and compare it to original version? Reason for asking is that I m contemplating upgrading to mk11 and where I come from I do not have the opportunity to audition it

Another question I wld like to ask owners of VR4sr is that did anyone of you replace the datalink? if yes what is the sonic improvement you hear and what did you replace it with? TQ

Gammajo, tq for responding. Maybe I should wait until I m more certain. As for VS marketing, I find it out that VR SR Mk 1 ebony veneer used to cost USD2k more than other veneer. However, for MK 11 model, all veneer is of the same price. It really make a sucker out of me for purchasing the ebony version which is the only 1 available by my dealer. Few months ago I got a blown woofer and it took me more than 3 mths to get the parts for repair. Bad experience. Despite, the bad experience abt their service, I do like the sound of the speaker especially the bass. By the way, did you replace the datalink?
Happy listening

Douglas_schroeder, I did read the instruction from VS. However, I m not keen to biwire the speaker.Currently using Transparent reference cable. With biwiring it will cost me as much as the speaker. Wonder whether it would be possible to use a short speaker cable instead of the data link and get any kind of improvement? TQ for responding. Happy listening

Gammajo, thank you for yr suggestion. To borrow for trial when I m in Malaysia may not be practical. Anyway I will find a way to get another pair of cable to biwire. Still curious whether anyone try to use a cable instead of using datalink and whether there is any improvement. Happy listening

Gammajo, I use Transparent cable that I purchased for abt USD400. You can check the price from montana-audio.ch. Otherwise just goggle Transparent cable. I didnt try other jumpers so cant comment on the difference. Ozzy, Blindjim, I connected 1 terminal of the speaker cable to the lower post and 1 to the upper post of the bass unit as well. Are you saying u dont need the jumper cables at all to connect the other 2 binding post of the bass unit? well I have not tried it. Will check it out when I back fr holiday in a few days. Happy listening

VS service standard? Took me more than 3 mths to get my replacement woofer drivers. How is that for service? Confidence abt future upgrade? pretty low unless I absolute low the product and I feel that I cant get a better speaker to be liking elsewhere

Ozzy
"I also have purchased the Brass and Granite speaker outriggers". May I knw what is this outriggers and what is it for? tq