Ohm Walsh Micro Talls: who's actually heard 'em?

Thanks Mapman, for taking the time to respond. I've been somewhat out of the loop regarding Ohm Walsh speaker model progression. So I must admit that I'm not familiar with models 100S3, or 5S3. I would only guess that those model upgrades are the predecessor to the x.x000 series of upgrades.

I've been so happy with my 4's all these years, that it's only been within the last few years that I have taken up the interest again, in speakers, that is.

About a year ago, or so, I had John design and build me a 3000CC custom center channel. I say custom because it's mounted from the ceiling with the driver being inverted 180°! After trying a couple of different center channel speakers over the past decade, I decided to speak with John and see what he could do for me. I am very pleased with the results.

I listen to a lot of multi-channel music, and for the first time the forward sound stage has a timbre match that is much more seamless (I should have done this long ago)!

So, I'm excited and hopeful, that the 4.5000's will be a very noticeable audible difference.

Dave

As a happy owner of the 2000s and an older pair of MWTs, I would say, expect clearly audible, but subtle differences. Not night and day changes. This is a good thing. Unlike some speaker makers, Ohms continue to be voiced similarly by the original designer, John Strohbeen, and he is good at getting speakers to sound the way he wants them to. So, the Ohm house sound is retained, just refined further in an evolutionary way.

Thanks Bondmanp. I guess I'm just expecting to hear a bit more detail in the mid thru high range frequencies. I still love the Ohm Walsh sound. The imagery is wonderful. I'm not sure I'm looking forward to having to remove the old binding post/control board, though. Taking a hammer, of sorts, to my beautiful speakers will be a bit disconcerting!

Dave

Coot I'm very happy with my McCormack DNA-250. The bass respose was noticibly improved over my Sumo Polaris II. Note that the McCormack is rated at 250 wpc, but that is into an 8 ohm load and the Walsh 5000's present 6 ohms so the output is over 300 wpc to them. And the price of the amp at around $2500 is very attractive. The other thing is that if you want to upgrade the amp, Steve McCormack (who lives in Vista, CA) offers upgraded caps, etc at a variety of price levels.

Carja - Thanks for your input. A few years ago I was hot on McCormack 500 and then they seemed to fall off the map. Seem to be weak on marketing which makes me nervous - as in about to disappear from the scene.

I see your photos. Looks like you have limited space as I do for the 5000s. I have a lot of air space due to large openings, but there is no way I can put these 5 ft from the wall. 30-32 inches is it. I know the staging suffers, but otherwise a nice natural sound - on chamber music especially. I'm satisfied except the old B&K runs out of gas and gets screechy and congested when I turn it up.