Speaker Wires on Carpet

Sorry to disappoint you guys that have not heard a difference, but elevating your cables over the carpet makes a notable positive difference and is well worth the investment. I obtained some old glass telephone and power insulators from antique stores to get mine off of the carpet. It works great and is much cheaper than the commercial products on the market.
For you doubters with hi rez systems: Try it, you'll like it!
Good listening,
SGR

Rushton is right. Synthetic carpets are a dialectric! They WILL interfere with the electrical signal passing through the speaker cable. The better a speaker cable is shielded the less likely a listener is to notice a big improvement by raising the cables off of the floor, but even with my Purist Museaus, and later Venustus there was improvement.

None of this is idle speculation, it is common knowledge that synthetic fibers has dialectric properties that will affect the transmission of an electrical signal. If you don't believe it, leave your cables on the floor. If you raise them with something as simple as home-made wood tepees you will notice an improvement.

buy some tennis balls and put them underneath your speaker cables and listen then remove them and listen again you should clearly hear a difference

Ceramic cable hangers are available from Farm & Fleet or any other large hardware chain store ( Home Depot ) that has a good sized electrical department. A couple bucks a piece at most. Get the bigger ones, not the little ones. You won't need as many and even if the cables sag between them, which they will, the higher elevation probably won't let them touch the carpet, etc... Buying the same quantity of ceramic "audiophile approved" cable supports would cost hundreds of dollars rather than a few dozen dollars. Only drawback is that you've got to unscrew / remove the lag bolts that are threaded into the ceramic base of these. A little labor can save you hundreds of dollars. Sean
>

PS... If synthetic carpets can't store residual energy, why do people get shocked from a build up of static electricity arcing from their hand to a door knob or other metal objects??? As such, isn't it possible that the very high voltage level that is required to arc across non-conductive free air could also affect a conductor that already has voltage??? Wouldn't an equation like this be part of understanding basic principles of induction? Do the math regarding the conductivity of an inch of free air and that of a few millimeters of plastic, pvc, teflon, etc.. and then come back and talk to us. I'll give some of you a hint so that you can pass the test. You need to study a LOT more BEFORE raising your hand to volunteer answers.

Elevating cables is one of those things in audio according to most people's common sense shouldn't make a difference in sound quality but it does.