I suspect the volume pot. I once owned an older Arcam int. amp which had this same imbalance issue at very low volume. You might be able to add a high quality "Blue Alps" pot. to your Jolida, or adjust the balance knob. My former 102b did not have this issue. However, there was a slight "hum" from the spks., which I was able to nearly elimanate w/the addition of Telefunken tubes. Good Luck! Bill
Unequal volume between channels - Help
At low volume, the right channel of an integrated amp is inaudible until it is turned up a bit. I suspect the channel may also be a little quieter at higher volumes as well, but I have not measured it.
Anyone know what I might try to do, before sending it somewhere for work? I have already rebiased the tubes, cleaned all speaker contacts, and switched speakers. As a side note, when the balance it turned all the way to the right, the left channel crackles a bit during the adjustment. Amp is a Jolida 102b.
Thanks ahead for suggestions!
Anyone know what I might try to do, before sending it somewhere for work? I have already rebiased the tubes, cleaned all speaker contacts, and switched speakers. As a side note, when the balance it turned all the way to the right, the left channel crackles a bit during the adjustment. Amp is a Jolida 102b.
Thanks ahead for suggestions!
2 responses Add your response