Ha-ha-he man – please tell me my last post brought a couple ha-ha’s to you?
FWIW – the first time I saw that I almost soiled myself. I actually printed it off and put it on our fridge. I think it helped me to bring in one amp and one speaker. (grin)
Fyi –
Here is my ET2 and ET2.5 tuning information for various compliance cartridges from the last year. From a compliance high of 50 down to 10. And VTF’s of .8 gms to 2.1gms.
ET2 and ET2.5 Cartridge Setups
Richard – fwiw - I am getting excellent early results in my room with my low compliance XV1 and triple leaf spring. 2 fat and 2 skinny weights setup according to Dorothy. :^)
If you are the least bit curious I highly recommend you listen to your setup with a decoupled I-Beam – using a triple leaf spring and just the inert lead weights.
You could try this with and without your now famous lead spindle slug?
Two I Beams and 5 loose leaf springs to make up a double and triple leaf spring can be purchased from Bruce for a very nominal amount of money. Otherwise enjoy the tunes.
Cheers
FWIW – the first time I saw that I almost soiled myself. I actually printed it off and put it on our fridge. I think it helped me to bring in one amp and one speaker. (grin)
Fyi –
Here is my ET2 and ET2.5 tuning information for various compliance cartridges from the last year. From a compliance high of 50 down to 10. And VTF’s of .8 gms to 2.1gms.
ET2 and ET2.5 Cartridge Setups
Richard – fwiw - I am getting excellent early results in my room with my low compliance XV1 and triple leaf spring. 2 fat and 2 skinny weights setup according to Dorothy. :^)
If you are the least bit curious I highly recommend you listen to your setup with a decoupled I-Beam – using a triple leaf spring and just the inert lead weights.
You could try this with and without your now famous lead spindle slug?
Two I Beams and 5 loose leaf springs to make up a double and triple leaf spring can be purchased from Bruce for a very nominal amount of money. Otherwise enjoy the tunes.
Cheers