2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
ct0517's avatar
ct0517 OP
1,798 posts
 
Dover – thanks for the wine recommendations. Dorothy happens to be a whiskey girl. Hardcore all the way just like the ET2. No pussy footing around here.

Her personality is also just like Bruce’s for those that have had the pleasure of talking or emailing with him. All business. If Bruce wasn’t into flying I bet he could come up with a hell of a race car :^)

When any wine is being served I accept it - as it is Gods drink. Well that’s the excuse to my wife. If I have to buy it myself I am more a red wine guy. Prefer wine I can’t see through. So it is Pinot Noir over Gris for me if I had a choice. White wine tends to taste like grape juice to me for some reason and goes down same. Car keys please....

As it is summer here now I enjoy Sleeman Cream Ale while listening to bull frogs and authentic Canadian Loons that have come home.
john47
50 posts
 
Correction: the review I posted was not Stereophile. It was Audio magazine, 1987, reviewer Edward M Long.

Dover: "Back in December last year I posted a postulation that one could consider mounting the cartridge slightly forward of the tangent line."

I don't believe you "posted a postulation."

You reacted to information known since Edward Long published it in the measurements section of his Audio review, year 1987 (that channel synchronization wasn't achieved until an overhang of .125 in was used).

I phoned Bruce Thigpen on the issue in 1987 ie overhang, and channel synchronization.

He said "He's probably right. I was aware of this, and should have, but never pursued it further."

We assume, I suppose, on this thread, that BT can solve all problems, but he has fingers in other pies.
ct0517's avatar
ct0517 OP
1,798 posts
 
John47 - We assume, I suppose, on this thread, that BT can solve all problems, but he has fingers in other pies.

No not really John - check the original post for this thread.

http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1325551242&&&/Eminent-Technology-ET-2-Tonearm-Owners

Its asking for ways (as a team)to improve the tonearm.

My personal definition of a great design is one that can be tweaked and made better without changing the basic design.

With that I have tremendous respect for people that think outside of the box and don’t follow the herd. Are willing to take some chances.

In this audio hobby with my personal experiences I could name maybe 4 or 5 individuals including BT. I believe we all have this list of people from our own experiences?

Cheers

dover
1,165 posts
 
06-17-13: John47
Correction: the review I posted was not Stereophile. It was Audio magazine, 1987, reviewer Edward M Long.
Dover: "Back in December last year I posted a postulation that one could consider mounting the cartridge slightly forward of the tangent line."
I don't believe you "posted a postulation."
You reacted to information known since Edward Long published it in the measurements section of his Audio review, year 1987 (that channel synchronization wasn't achieved until an overhang of .125 in was used).
John47 - it would be helpful if you read my posts more carefully.

This is precisely what I wrote -
Back in December last year I posted a postulation that one could consider mounting the cartridge slightly forward of the tangent line. The theory is that if you are running at the tangent then there are no lateral forces on the stylus and it will “chatter”, slowly eroding the high frequency grooves over time.
The postulation has nothing to do with the Audio article on timing differences - it is about possible tracking issues at tangent due to the lack of lateral forces on the cantilever.
This is similar to olden days cars that had kingpins in the front steering - drive in a straight line and the wheels wobble, but as soon as you turn the steering wheel off centre, then the wheels stop wobbling and start tracking securely.

The following paragraph on the timing differences between channels highlighted in the Audio article is a different issue, albeit one that has the same possible remedy of running forward of the tangent.

So when you said
I don't believe you "posted a postulation."
You reacted to information known since Edward Long published it in the measurements section of his Audio review
you are wrong.
john47
50 posts
 
Dover: "The theory is that if you are running at the tangent then there are no lateral forces on the stylus and it will “chatter”, slowly eroding the high frequency grooves over time."

The theory - its A theory.

I'm fully aware of engineer Tony Kriletich's ideas (as above).
He suggested running with overhang in the eighties.

More to discover