That subconscious fear of a cell phone also goes at least a million times greater than phone books. It has phone numbers,world wide web connections etc.See if putting all cell phones outside your house preferably at least 100ft. does not make your listening experience so much more enjoyable due to the lack of fear.You have to put the fear in to take it out,here buy this.This is in response to break-in bane or boon?
break-in--bane or boon ??
as a reviewer , i often receive equipment which is new and has no playing time.
i have to decide whether to break in the component and if so, how many hours is necessary.
i have often asked manufacturers for guidance.
one cable manufacturer said the cables--digital, analog and power, required no break in. another said 24 hours.
when i reviewed a mcintosh tube preamp, i was told by a technician that no break in was necessary. all i needed to do was leave the preamp on for one hour in order that the tubes were "warmed up"
can someone provide an objective explanation as to the basis for break-in and how to determine how long to break in different components ?
for example, cables comprised of different metals, if they require break in, is there a difference in the requisite time for a given metal, e.g., gold, silver or copper ?
can someone provide an explanation as to what is happening during the break-in process ?
can one devise a mathematical equation to quantify break-in hours, as a function of the parts in a component ?
i have to decide whether to break in the component and if so, how many hours is necessary.
i have often asked manufacturers for guidance.
one cable manufacturer said the cables--digital, analog and power, required no break in. another said 24 hours.
when i reviewed a mcintosh tube preamp, i was told by a technician that no break in was necessary. all i needed to do was leave the preamp on for one hour in order that the tubes were "warmed up"
can someone provide an objective explanation as to the basis for break-in and how to determine how long to break in different components ?
for example, cables comprised of different metals, if they require break in, is there a difference in the requisite time for a given metal, e.g., gold, silver or copper ?
can someone provide an explanation as to what is happening during the break-in process ?
can one devise a mathematical equation to quantify break-in hours, as a function of the parts in a component ?
- ...
- 64 posts total
- 64 posts total