Your probably right about Classe,but I thought they made Tube Stuff before getting into Hybrids!
I did not wnat to go to far into a HT setup so I got a Lexicon CP-3+ and a B&K 5ch. amp to use for suurounds which was my alternative to getting an ARC tube amp for now.After I get my all my NEAR Speaker's I will look into getting the Pre-Amp.
My goal for a Frontend Amplification is a ML amp mated with an ARC or Tube Pre-Amp which is the finest setup I have heard for my speaker's.If getting a nice used ML for the Front is to pricey I will look into something like PS Audio's HCA-2 (new Amp) or there might be something better for less by then!WOuld not want to venture into all Tubes with all metal driver speaker's!
Will try harder to keep abreast of the changes in the Audio World as it's been a few yrs. since I have been seriously into it.Seems I drift back after awhile!Have been putting together a Mid-Fi system for a friend and have been re-tooling my system with new Speaker's and another go at a HT system!I hated my HT system when I tried to do it 7yrs ago and this is another attempt to see if it will be suitable without messing up my 2-Channel playback!
Best thing that has happened is finding NEAR's through the Designer and former president of the Co. who now works for Apogee!Got a pair of NEAR M15's with a spare set of Tweeter's and newly designed Woofer\Mid Driver's that are incredible($350).Went to audition B&W CDM 1NT's and these things blow them away.I have a Sub that goes down to 25Hz and the speaker's go down that far ,but the Sub adds a little more Impact!
M50's being refitted with a new crossover making them the most advanced version ever made.$2550 and I will pay $1000.Incredible speaker's for the cash!
NEAR's are in the same league as the Watts in my opinion having close to the same Tweeter in them(Inverted Dome).Might try refitting them with Scanspeaks at some point to see what diff there is!
I will look into the Atma from old Stereophiles I have!What are the prices on the used Market for them nad do they have a Phono stage?
I did not wnat to go to far into a HT setup so I got a Lexicon CP-3+ and a B&K 5ch. amp to use for suurounds which was my alternative to getting an ARC tube amp for now.After I get my all my NEAR Speaker's I will look into getting the Pre-Amp.
My goal for a Frontend Amplification is a ML amp mated with an ARC or Tube Pre-Amp which is the finest setup I have heard for my speaker's.If getting a nice used ML for the Front is to pricey I will look into something like PS Audio's HCA-2 (new Amp) or there might be something better for less by then!WOuld not want to venture into all Tubes with all metal driver speaker's!
Will try harder to keep abreast of the changes in the Audio World as it's been a few yrs. since I have been seriously into it.Seems I drift back after awhile!Have been putting together a Mid-Fi system for a friend and have been re-tooling my system with new Speaker's and another go at a HT system!I hated my HT system when I tried to do it 7yrs ago and this is another attempt to see if it will be suitable without messing up my 2-Channel playback!
Best thing that has happened is finding NEAR's through the Designer and former president of the Co. who now works for Apogee!Got a pair of NEAR M15's with a spare set of Tweeter's and newly designed Woofer\Mid Driver's that are incredible($350).Went to audition B&W CDM 1NT's and these things blow them away.I have a Sub that goes down to 25Hz and the speaker's go down that far ,but the Sub adds a little more Impact!
M50's being refitted with a new crossover making them the most advanced version ever made.$2550 and I will pay $1000.Incredible speaker's for the cash!
NEAR's are in the same league as the Watts in my opinion having close to the same Tweeter in them(Inverted Dome).Might try refitting them with Scanspeaks at some point to see what diff there is!
I will look into the Atma from old Stereophiles I have!What are the prices on the used Market for them nad do they have a Phono stage?

