What happened with the BASS? MC352/C42/B&WN803

You say you changed the IC from the pre to amp. If you went to balanced, you need to flip the switch on the back of the 352. I had the 42/352 combo. It's very good. I wouldn't be suprised if the Onkyo was a little riper in the bass. It's a little trick to sound warmer or richer. The beauty of the 42 is you have the 8 band EQ. Just warm the sound up a bit with those knobs if you prefer. I would suggest flat for awhile to give your ears and brain a chance to adjust. The Mac's look good in the dark don't they.

Rodney,

Many reviews have published the impedance curve of the N803 and they show 4 ohms or less until the high frequencies are reached. By using different taps you can change the balance by plus or minus 3 db. This is popular when your speakers are out in the room and the bass is light due to the lack of wall boundary reinforcement.
We always ran the N803s on the four ohm tap when we used them at the factory, yes on a MC352.

Ron-C

Ron, with your words, I will definately give the N803 a try with 4ohms.

Onemug, balanced cables would be nice. I just spend over 3k over the weekend and hard to convince my wife for another new cable. The Mcintosh equiqments definately look good in the dark, That one of the many reasons I chose Mcintosh.