Amp heat sinks are ringing

Didn't read the whole thread -did anyone suggest using spring-type wooden clothes pins? Clamp the suckers ON!

My Forte 4a amp has singing fins. I use stiff slivers of rubber at varying spots throughout the fins to dampen the ringing. the total area of the slivers is only a thousandth of the area of the fins. Bulky things to dampen the fins on a hot baby like my Forte would be bad. The 20 or so rubber slivers I use are 1/4 inch square and about 3/4 inch long are fine, I carved them from big chemical industry bottle stoppers.

Perhaps someone suggested this and I just missed it.

The easiest thing to try first is just apply one continuous strand of electrical tape across edges of the fins connect them via the tape, which changes their ability to vibrate. You may have to run more than one layer, but if your fins are black and you use black tape, the fix is almost invisible to the eye (and cheap too).

I thought this was a fairly common tweak, but maybe not.

Before you get to the point of placing everything but the kitchen sink, french (Oops a.k.a Trader) fries, etc. in your heat sinks.

1.) Call Classe, see what they have to say?

2.) Your room needs more work, forget "Foam", & don't go crazy spending thousands of dollars on specialty acoustical panels.

A.)Tell us more about your listening room! Hardwood floors, huge bay/picture window, cathederal ceiling, etc.

B.) What kind of stands are the amps on, Metal???

Get some Homasote Fiberboard 4'x8' panels covered w/ Burlap, they are 5/8" thick & fire rated. You may have to special order these $28-50 ea. This is what radio stations & TV broadcast room walls are covered w/ instead of drywall. They cut easily (yet messy) w/ a carpet knife. You can make up your over rectangular wall panels, paint the burlap & frame the edges w/ oak edge trim from Chateu' Depot. Or cover entire walls w/ it, as once painted it looks quite attractive? Pillows, Heavier Drapes, etc.....

You won't believe this but if you search the web, you'll find interior paints w/ acoustical dampening properties, along w/ Low E, etc. at $45 a gallon.

Secondly, I would concentrate more on the base the amp is on, & dampen/isolate the heck out of it.

Placing any foreign object in my heat sinks would be the last step, Gosh the CAM-200's where actually on my auditioning list. Well not now that you need auto parts to get them to sing, oops not ring. Only Kidding :0)~

Seriously, need more info on your room itself!!!

P.S. Gnobber "STOP" Running your fingers along the heatsinks!!!