Gunbei, thanks for the advice. I was looking at my audible illuions L-1 manual and it states that the output impedance is 1.2Kohm. The aragon 4004 mkII does have an input impedance of 22Kohm. This tells me i am on the low side of the of the guidline range but also i am well within it at 18 times. Not completely sure that some of the problem doesnt lie in this area but with the dynamics as such i highly doubt it.
Need some audiogon expertise
Hi all, I am having a little problem here with thin bass. I am not really sure where to start. Some help would be most apprecieated. I have heard some say tubes in preamp but i dont feel that 2 little 6922's can be causing the music to be so thin but maybe so. Heres my list of equipment.
California Audio Labs Icon/Powerboss
Audible Illusions L-1/matched pair of 6H23-EB
Aragon 4004 mkII
Sansui TU-717
Vmps Tower 2/R's
Acoustic Research 12 guage
Radio Shack fusion IC's throughout
Stand alone i've not heard of any of the components having the traits of thin bass. But obviously i have something causing this.
Room is 22 x 14 x 8. Speakers are on the short wall placed 2 1/2 feet from back wall and 3 feet from sidewalls toed in directly at my listening position which is 10 feet from speakers.
Thanks for the help.
California Audio Labs Icon/Powerboss
Audible Illusions L-1/matched pair of 6H23-EB
Aragon 4004 mkII
Sansui TU-717
Vmps Tower 2/R's
Acoustic Research 12 guage
Radio Shack fusion IC's throughout
Stand alone i've not heard of any of the components having the traits of thin bass. But obviously i have something causing this.
Room is 22 x 14 x 8. Speakers are on the short wall placed 2 1/2 feet from back wall and 3 feet from sidewalls toed in directly at my listening position which is 10 feet from speakers.
Thanks for the help.
- ...
- 31 posts total
- 31 posts total