Need suggestions for a new amp 200Wpc


Own Plinius 100MkIII, Dynaudio Countour 3.3, Sony SACD-1 Sony TA-E90ES pre all inside 25'x16'x18' (full catedral ceiling)room. Need amp for better bass control, cleaner sound. Looking for an amp with 200wpc or more, in range of $4000-$5000 used! What do you think BEST will work with Dynaudio speakers?
susan66e51f
Both have been mentioned, but you could do a Krell FPB 300 or the Pass Labs X250 for less than you mentioned and be over the 200 wpc mark.

I have the FPB 200 and think it's a great little (okay so it's not that little) amp and it will drive anything without four wheels.

The bass is full and explosively fast with the FPB series. There is plenty of reserve power for those difficult passages.

Unfortunately I am not familiar enough with the Dynaudio speakers to say which one of these two would work the best with them.
InnerSound ESL. Drives my Magneplanar 3.6s effortlessly and sounds as good as any tube amp.
You can buy a used Pass X350 for less than 4k. Truly a great amp. Much better value on the used market than the krell fpb series. If you do a search on this forum you will find multiple positive comments.I am not a dealer but I know a great source for used pass equipment. Email me if you would like to discuss.
Ditto Darqwolf, Keithr and ddrdiamond; to paraphrase and quote, "Krell, FPB series as big as you can afford." I use 400cx, that's what Dynaudios (and Thiels, he he) like.