1. Home
  2. amps-preamps
  3. 1102836534

Amp is stuck "on"-rocker switch is not engaging

So, my amp is stuck permanently "ON" with the rocker switch not engaging any more. I can't send it in for repair for awhile, as I will need it over Christmas (I will make arrangements to get a backup amp while this one is in for repair). Can I just unplug it when I am finished using it for the night, or is that an unsafe practice? I could use a cheap power strip to turn it off/on, but those things typically have surge protectors that sound like crap (I would prefer to keep running the amp through my HC Ultimate Outlet, if possible). What are your thoughts?
chiho
avguygeorge
2,300 posts
 
Sean; On $200--Not quite but close enough. It is a "breaker" type / looking device. I have replaced a few on/off rockers---cake---I swear the entire guts must be removed;just to get access.
sean
6,229 posts
 
Was the $200 just for the switch or was it for the switch and labour? From your post, it sounds like it was for the switch itself and you are doing the labour. If such is the case, i'm still in the wrong business : ) Sean
>
avguygeorge
2,300 posts
 
No, the price was just for the switch,Sean.-- While I had the amp on its side I flipped the switch a couple of times. Then I heard a loose piece jiggle;within the switch.--- Since then it works better. Once in a while it will work first time; other times it takes 2 tries.---This is better than the 5/6/7 tries before the piece within, dislodged.
More to discover