1. Home
  2. amps-preamps
  3. 1103816815

Tube Newbie

I have been running a fairly beautiful 5.1 surround set-up over the last few years, and have grown a bit weary of my 2-channel quality. While I love the quality of surround sources (DVD, HDTV, ProLogic II), I tend to get listening fatigue with dynamic music. My goal is to warm-up 2-channel, making it more itimate witout wiping out the detail and punch in my 5.1 sources.

A good friend has suggested a CD player with a tubed output stage, like the Ah line carried by Upscale Audio. I am also considering a VTL 2-channel amp (around $2K) to drive the L/Rs of my system.

I am wondering how difficult it is to deal with tubes. I have read about "biasing" tube-based amps and have no idea what that intails.

My current system consists of: Gallo Reference 3s L/R, 7 channels of amplification from Parasound Halo (A52/A23), Def Tech SuperCube II sub, Gallo Dues for the surrounds and a soon-to-be-upgraded B&W LCR600 for the center channel. The Gallo Reference 3s have the second coil of the woofer bi-amped via an Outlaw Audio ICBM (hence the 7-channels of amplification). Processing is via an older Rotel RSX-1055 (using the pre-amp outs) while I figure out what pre/pro to get. The DVD/CD player is an Integra 5.3 using the analog outs for 2-channel.

Thanks,
Ted
teonyc
jw94055
125 posts
 
"Scott Nixon Tube DAC", put that into Google and see what people are saying. It may be an inexpensive, yet successful, solution.
jphii
485 posts
 
Dealing with tubes is not a hassle considering some of the other lengths we go to in our systems. The easiest way to deal with the biasing problem is to buy an amp(s) that does it for you. Also, every tube cd player I've heard sounds better than SS at this end of the scale. The Ah! is nice. I have an Audio Note ANCD2. I've never even screwed with the tube in it, I like the sound the way it is. I think the Audio Note DACs should give you much of the same sound.

You have a lot of options you can try that are on the inexpensive side. Plus, you can usally get most of your money back if you buy used, in case you don't like the sound. But having a "bias" towards tubes myself, I'm guessing you just might like it.

FWIW,

Joe
newbee
4,093 posts
 
Tube CDP's/DAC's are a walk in the park. You change tubes only when they fail or wear out. When they fail you loose a channel, when they wear out you can tell by the sound which becomes dullish. Same for tube pre-amps. Amps are a bit more problematic but only a bit if you make sure when you buy one that it has individual bias controls for each tube and a built in meter. I've owned a lot of SS stuff and tubes over the years - I've had a lot of SS failures and only a few tube failures (related just to the tubes). There is a learning curve in using and buying tubes but that can be seen as part of the hobby.
More to discover