Conrad johnson MF2300 A


I have a pair B&W nautilus 803. I would like to up grade new amp . I have a friend of mind offer Conrad johnson MF 2300A for 1100 Us. I can pay 1500 US for the amp.
Please anyone would give me a advise.
Thanks in advance
dung0981
An amplifier usually designed as Class AB; meaning during lower wattage usage (usually 10 watts on demand, up to its limits.

A Class A amp is always running full bore, regardless of what is asked of it, the extra wattage will turn to heat. There is no A to B switching, thus less distortion.

So, Class A or AB has less to do with how much power it can produce, rather it discribes how the amp is designed. Class A is less efficient, hot, but can sound very nice and warm. But,there are good sounding amps using either designs.100 watts of Class A is no more power than 100 watts of AB.

As for the speaker asking for "up to" ( I assume max) of 250W...it is probably telling you not to drive 250 watts into it, which is very very loud. Unless, you are really into head banging music, I would not worry. The amp and the speaker should be a great combo. Enjoy.
Let edit my post above...the first paragraph got cut off. I was trying to say an AB amp runs class A, usually up to 5 to 10 watts. During Class A, it is running to its Class A limit of say 5 watts. If the power is not needed, then the watt is disappated in heat via the heat sinks. If more power is needed, then the amp switches to class B, where it will provide wattage on demand.
I agree with Rich3549. Class A amplifiers are biased up to the point were the output devices are running full tilt all the time. Class A designs use more current and require large heatsinks to dissapate the heat. Not a very efficient design but do generally sound sonically better than class A/B. Class A/B amplifiers are the dead opposite & the bias is set to a predetermined setting where as the output devices runs cooler until called upon for higher volume levels. Class A amps have a tendancy to wear themselves out faster than class A/B amps(eventually requiring replacement of output transisters & caps). Note some class A/B amps are biased up a bit to give you the first 25 watts in class A. The MF 2300A is a superb class A/B amp and at 1100 US is a very reasonable asking price.