McIntosh 501 or 602 for Magnepan 20.1


Has anyone tried any of the big Mac amps with Magnepan 20.1? I'm in the search for an amp. I'm considering:

Krell 400/450
McIntosh 501/602
Rowland 302
H2O Signature Mono

I'm running an Audio Aero CD player so no preamp is involved. I have heard to bypass the H20 and Rowland since I don't have a preamp but I haven't had a chance to try it in my setup.

Thanks...
muslover
Gladstone: Parasound JC-1 pushed to the limit with the MG20.1s??! That does not sound right. Maybe you had issues with your power connection to the JC-1s, or some other problem.?

I run my 20.1s with a pair of JC-1, and IMHO the JC-1 powers the 20.1 effortlessly! I'm currently adding a 2nd pair of JC-1s for a bi-amp setup, and frankly I'm a bit worried that putting 2x800W into one 20.1 will be too much...

Peter
It won't be too much. It should sound a lot better with more power.
Yes, the JC-1 can run the 20.1s, but it doesn't control them the way a truly high-powered amp does. Just look at how little the JC-1s weigh. The real bruisers weigh 100-200 pounds a piece because they have big power supplies. I'm using the JC-1s on a pair of Magnepan 1.6s, where they sound much better.
Instead of getting another set of JC-1s, I'd save some money in your place and get the Classe Omicron or Omega, MK. 1. Far superior. I had them side by side. No contest.
The JC1 does have a pretty decent power supply -- the best you can get in an amp that only costs $6000/pair.

FWIW, my Magnepan dealer recommends Bryston 7B-SST for the 20.1s. The Bryston 7B weighs only 50 lbs. At least the JC1 is 64 lbs....

Of couse the Omega is better. At $25k/pair it has to be better... Why not get a pair of Simaudio Moon Rocks. They are 220 lbs each. Maybe that qualifies?

Peter
SimAudio W10's might work well with the 20's. They work very well with the 3.6's. Remember that the Mac's don't double into 4 ohms. I understand the power stage is looking at the fixed impedance of the Autoformers, but I tried the MC252 in my system on the 3.6's and it shut down on thermal overload after a few minutes of playing at moderate levels.
I've also driven a 600w (into 4 ohms) digital amp into clipping on the 3.6's....I'd get an amp with high current capacity into lower impedances and avoid any chance of under-powering the 20's.
Rooze