Which Mono block amps for ML Summit Speakers?

I am very happy with Meridian monoblocs on ML Aerius speakers.

Yo 'lectrostaticman! My last pair of Logans (Prodigys) sounded extremely good driven by a pair of JC-1's... if you really need monos for some reason.

Also, I heard a pair of Odyssey's at a friend's driven by a Pass 250.5 that was every bit as good as I've ever heard.

Please be sure and let us know all about the Summits if you ever spring for a pair.

I just checked the ML Summit specs. The built-in woofer amp is 200W. Recommended external amp (for the panel only remember!) is 100-300W. None of the prior ML speakers had on-board amps, and thus would have employed a completely different electronic interface between the power amp and crossover -- so I feel that amp/speaker experiences w/ previous ML models must be considered anecdotal when speculating what would work best with the Summit, which is decidedly not an evolution of their previous hybrid models.

.

While not having an on-board amp for the woofers, the interface, ie electronic xover, is the same as the Summit as it relates to driving the panels.

I also missed the Antique Sound Labs Hurricane and the Cary v-12 mono's. Again used.

I have no view on SS amps having not listened to any model seriously in almost 10 years. A lot has happened then, as I found out when I replaced my tube pre with a Pass Labs X-1.

There has been a change in my thinking. My wife has decided she will accept the speakers in her living room but no other equipment in the vacinity. So I will need recommendations on equipment which will now need to be located 50ft away in a equipment cabinet. I will need to run the these speaker cables in the wall to the attic above the room, then over to a equipment closet with a 10 or 12ft.drop.

Please continue to suggest equipment & cable (cost effective).
Thanks,