1. Home
  2. tech-talk
  3. 1044892712

Chassis ground and balanced mode - please help me

Plinius SA 102 has a ground switch (open vs. chassis) that they specify should be set to Chassis when running in balanced mode.

1. I assume that this has to do with achieving proper noise cancellation - but if not can someone straighten me out?

The problem: I am trying to run the Plinius with a Pass Labs X1 pre in balanced mode. There is a LOUD ground loop hum when ground is set to chassis that goes away in open position. Floating one of them does not help.

2. If I power the Plinius and the Pass using two separate lines back to my panel, will this ground loop problem be removed?

3. Will I be able to solve this problem?
jsteigert
sean
6,229 posts
 
J: I think that a phone call to both manufacturers might offer you quite a bit of info. I'd be curious as to what you find out, so please, share the wealth once it falls into your lap : ) Sean
>

PS... I was not talking about Pass or Plinius gear in specific, but all audio gear in general.
jsteigert OP
14 posts
 
Mystery solved. I was working with a dealer on these speakers when this event occurred, getting ready to bring them home. He was behind the amp operating the switch. It turns out that things were actually working as they should have. The big hum came when he switched the amp into OPEN mode and went away when he switched to chassis ground, exactly as SHOULD have happened. The only thing backward here was the communication between us. Thank God for little things.
sean
6,229 posts
 
hahaha.... as they say, it's the simple stuff that'll kill ya : ) Glad to see that it really was simple : ) Sean
>
More to discover