What brand of cables are they? I've had a number of balanced cables that really weren't balanced and hummed like crazy. They were just coaxs with XLRs stuck on the ends.
impedance mismatched ?
Audio Aero Capitol Mark 2 running directly into amplifiers via balanced outputs has a output impedance of 100 ohms.
My VTL 750 REFERENCE amplifiers balanced input impedance is 137 ohms. Is this a impedance mismatch which could possibly cause a audible [20 feet away] hum to result when using 1 meter balanced Interconnects? when using the RCA outputs and RCA inputs with same components as above [same impedance specifications for RCA also] their is absolutely zero hum. And yes the XLR pin configuration has been confirmed as being correct on my balanced Interconnects for these components. was suggested could be a ground loop causing the hum but when plugged all 3 components into a power strip the hum still remains, even if floating all the grounds with cheater plugs.
My VTL 750 REFERENCE amplifiers balanced input impedance is 137 ohms. Is this a impedance mismatch which could possibly cause a audible [20 feet away] hum to result when using 1 meter balanced Interconnects? when using the RCA outputs and RCA inputs with same components as above [same impedance specifications for RCA also] their is absolutely zero hum. And yes the XLR pin configuration has been confirmed as being correct on my balanced Interconnects for these components. was suggested could be a ground loop causing the hum but when plugged all 3 components into a power strip the hum still remains, even if floating all the grounds with cheater plugs.
- ...
- 9 posts total
- 9 posts total