The Great Cryo'd Outlet Test

I wouldn't hazard a guess one way or the other about strings. Their properties would be changed by cryo, but the sound is emitted more by the sounding box of the instrument than by the strings themselves. The strings excite the box (or other resonant element of the instrument). Perhaps the string tension would be affected by cryo, but the retensioned string would perform the same.

Ed: When you are finished with the receptacles, if you want to send them to Stehno for some testing, that would be OK with me as long as Stehno then forwards them back to me after he is finished.

It would be interesting to see if Stehno can identify any differences in the outlets, as he would have no way of knowing which was which as they come from you (one box is marked cryo but there is no indication on either receptacle, could put them in the same boxes they came in-can't even remember if I shipped the 2nd one in a box, or choose not to-a true blind test). I do, however, know which one is definitely cryoed and for the sake of true science, could inform a couple of other members prior to Stehno's "test" and see if he correctly identifies the cryoed outlet.

Hdm...Sure. Will ship to Stehno if someone gives me an address.

The Cryo'd outlet was in a carboard box, the other was not. I have mounted the two outlets in two electrical boxes, marked "A" and "B". One outlet had all four terminal screws, while the other had only two. I removed the extra screws (and put them in a plastic bag) so I don't think that anyone can tell one outlet from the other just by looking at them. I will ship the whole rig on to the next guy. When all the testing is done Hdm will have a handy heavy duty extension cord!

Of course I know whether the Cryo'd outlet is "A" or "B". I guess I will put this info in a sealed envelope and send it to Hdm to do what he likes with it. Obviously, people who test the outlets should not know. (Hdm might like to test his ears before opening the envelope).

Of course, if many people ran the test, guesswork would produce 50 percent correct choice. But perhaps more, or less. It would be interesting to take a poll without anyone listening, so that what you are guessing is eldartford's frame of mind, and whether he would tend to label the cryo'd outlet "A" or "B". This might introduce a significant bias into listening test results.

Ed: If it's easier, just send the receptacles (I certainly don't need the extension cord or boxes) to Stehno without the box that the one outlet came to you in. As you point out, anyone will have a 50% chance of identifying the cryoed versus non-cryoed. Before I sent the cryoed unit off to you, I did something that would allow me to identify it as the cryoed one anyway, so I'll be aware of which one it is and be able to confirm whether someone has identified the cryoed unit in a listening test. Stehno, where are you?
E-mail your address to Ed and prepare to be snake oiled! Perhaps these receptacles can do an Audiogon tour of duty!

Is this a test? Hdm, I'd be happy to try the outlets. But first let me share the electrical setup I have:

I have three dedicated lines going to two seperate FIM non-cryo-treated outlets. One outlet has been split so that my 20 amp line (amplifier) is plugged into the bottom receptacle and a 15 amp (cdp) is plugged into the top.

This outlet used for the amp and cdp is ungrounded at the outlet.(just not connected the grounding wire)

The second FIM outlet is a 15amp grounded line used for the preamp.

In addition, I've consistantly noticed the biggest electrical-type sonic improvements when changes are made to the amplifier's line/connectors/conditioners.

With that said, Hdm, if not done already, would you have a problem my severing the contacts between the lower and upper receptacles for the purposes of this test?

If that is not a problem, then I'll send Eldartford my address.

If you do not prefer my altering the outlets to maximize the differences, I can still A/B compare with the preamp outlet. But the differences (if any) simply would not be as evident.

-IMO