Advice for newbie on Tube gear

Did anyone read this post? The gentleman is asking about a preamp and CD player to use with a SS amp and the answers concern PP vs. single ended. This is misinformation at its worst. Line level devices, as opposed to power amps, operate tubes in single ended configuration, only valve power amps, which the gentleman has said that he is not considering, operate either as single ended or push pull, so the issue is moot. To answer the questions, the tubes that these components use are very inexpensive, on the order of $20.00 each. They are in current production in a number of countries in the Eastern Block and Asia. Finer new versions of these same tubes made in domestic and European factories decades ago are also plentiful, but for a bit more cash. Generally, preamps do not need any maintenance or biasing. It is very easy to change tubes as they are designed to be changed. No capacitors need be changed when the tubes are changed although valve preamps operate at higher rail votages than SS and may have more problems long term. Unlike SS where failures are often catastrophic, problems in tube gear can generally be remedied rather easily. The Sonic Frontiers gear may pose a problem in that the company was sold to Paradigm which ceased production of the high end tube units. The SF gear is generally more complex in it's power supplies than comparable products. Tube life varies, always have a spare set around. Hissing or popping noises usually signal that it's time to change tubes. You should get a couple of years use easy. Some tubes can last a decade or more. I say go for it.

Complete tube is the best resolution rather than going half tube and half SS. Sonic Frontiers is more close to solidstate feel. So I bet you prefer to have good dynamic movement in music, and also fast bass response.

My suggestion is to have SFCD1 (about US$1000 to US$1500), depends on condition. Then go for a solidstate pre power combo.

If you made the will to go for full tube gears, considering your high efficient French speaker (96db), why not go for a 300B tube integrated amp like Consonance Reference 5.0?

"I'm seriously thinking of getting into tubes" "I'd appreciate ANY advise on what I'm letting myself in for" Sounds like a general question on tubes to me?? Mabe my response should be go ahead and buy this stuff- you might like it, you might not but thats ok, it's your money not mine. I say go for it! Ya right. uhg

Sincere thanks to each who's posted a response (5 at the time of writing).
There must be many who've benefitted from these answers (I previously hadn't found all these answers on these forums - simple though they may be, but VERY informative to a novice).
Each suggestion/information has genuinly been helpful to me ... 300B's, Eldartford's experience, Sbanks explanation of the tubes and biassing, the TriodeGuild site, and Viridian's excellent to the point explanation of my particular situation.

I feel that I may be able to tackle the tube buying/replacing fear, and cope with the biassing (not so confident). I'm hoping I may be able to get away with doing minimal maintenance with the tubed pre & CD, and may even look into SF's own power amps (SF80..?).

Meanwhile I'm going for the SF tubed pre & CD (They look so good together I can't separate!).

Many many thanks!!!

Mahandave, maybe it was a general question on tubes. Issues on changing/buying tubes + biassing were answered, as well as other suggestions. I didn't find those specific comments/explanations elsewhere. Opinions were welcomed - sarcasm was not.