1. Home
  2. amps-preamps
  3. 998741345

Help -- EAD PM1000 and REL Strata III experience?

When I turn off my amp, I get a loud hum, unless I turn down the volume, from the REL. My understanding is that the PM1000 has no grounding, due to its internally bridged design (dual differential?). I've contact EAD and my REL dealer, but no luck yet. Has anyone experienced this with my combination. I tried lifting the ground with a cheater plug, connect REL's grounding lead to the PM1000 chassis screw--still the hum. I have yet to contact Sumiko. It's my last option.

Thanks for any help.

Ken
kyyuan
kyyuan OP
28 posts
 
Everyone,

After a long week of work, I finally got a chance to fool around with the "Rel Leads" connection. No luck. I tried different combinations as Vongwinner suggested and the hum noise persisted. I'm a at a loss. My dealer told me that he'll check with Sumiko. I guess we'll see. Thanks for everyone's postings. Any more suggestions?

Have a nice labor day weekend, (for the U.S.)

Ken
kyyuan OP
28 posts
 
Readers,

I don't know if anyone is still checking this thread. Nonetheless, here is the result of my conversation with Sumiko.

According to Sumiko, to get rid of the hum on an EAD Powermaster 1000, connect the "black" lead to any inexpensive RCA connector, and then use available RCA connection on the preamp. Make sure you connect the "black" lead to the RCA connector's ground signal (outer portion). I haven't tried it yet. But the ultimate suggestion was to leave the amp on, which is better for the amp any way.

I hope this helps. If anyone tries this method, please share your experience with the group.

Ken
mike1000
69 posts
 
I had a hum challenge with my REL B-1 sub. I called sumiko and I ended up moving my REL cable away from my other power cords and I also connected the black wire (per sumiko's suggestion) to a screw on the chassis of my amp.

No more hum at all...

I love my REL now!
More to discover