How many Maggie owners have special stands?


I have recently put cinder blocks and top of my Maggie stands and am amazed at the improvement. The midrange became the main focus of the sound (not the bass) and the speakers came alive in the midrange in a way that I could not achieve with amps or wire.

I want to take my stands to the extreme now and make them absolutely rigid.

My questions are:

What is everyone else doing and how does it affect the sound?

Has anyone run posts from the floor to the ceiling and attached the speakers to them?

Maybe the second question is not necessary but you get the idea, I am convinced this is the kind of improvment Maggie owners want, more 'snap' and micro dynamics is what I hear.

cheers
Phil
128x128philjolet
If you want to try something then use the method that is width of front wall times .246 to determine distance from the side walls and front wall length time .447 to determine distance from the front wall. I saw this in a recent discussion and the link is http://members.cox.net/azaudiophile/cardis/placement.htm to see it. I tried it and it was very interesting the difference. My front wall is a little over 15' in length so my speakers are approx. 51" from the sides and approx 81" from the front wall. With my seating area centered approx 85" inches from the speakers which is the same distance as the speakers are apart from each other. If you get a chance try it some time.
Stenersr

It is interesting because that is almost where my speakers are now, the width is perfect and they are a little farther back than your formula suggests which for me is for more midrange warmth (after a lot of experimenting I can tell you).

Also an interesting setup to try is HPs 'rule of thirds' which is to put the speakers 1/3 of the length of the room out from the back wall and 1/3 of the width apart. I have tried this and it results in a very cohesive sound with unbelievabley tight bass, dynamics are improved and the speakers really seem to get out of the way of the music. It is just not a reasonable setup in my narrow and long room however.

I has someone tell me that he put 1.6s in the middle of the room (out from the back wall) and measured them to 35hz!

I mantain however that improved stands are a big plus, the sonic improvment is one you cannot get with amps and wire.
Philojet,

I had my 2.7QR speakers in the same position you had them for a long time. In my room and with my system the soundstage was a lot smaller. Although I have not done any room treatments yet I am currently having Rives give me suggestions on tweaking it. I am looking forward to getting the room set up and them hearing the difference.

I am not sure if I am going to hang onto this system after going to the CES show and hearing some great stuff. I would like to get more body, fuzz or whatever it is called out of the music. Anyway, it will take me a while to get there and will continue to enjoy the endeavor.
Is the distance from the side walls measured from the outer edge, or the middle, of the speaker? I have Magneplanar 3.6´s.
Thanks,
Hasse
Hasse

How are you? We have exchanged emails in the past.

I measure from the middle of the speakers with my 1.6s.

BTW I am really loving my AZ Hologram speaker wire, clearly a step up from the Satori in my setup.

take care

Phil