D-SONIC SOA Class-D Core Amps. The best Class-D ?


Owner/Designer Dean Deacon of D-Sonic in Houston in recent months dropped using the B&O ICE amps which he now only uses in the surround channels of his multi-channel home theater amps. He now uses a new Class-D amp in all of his Magnum2 mono and two channel amps which he states is the most technically advanced Class-D amp on the market, called the SOA Class-D core amps. The recent review in 6Moons of his new M2-1500M amp concludes its the closest that Class-D has ever come to tube amps in the upper mid-range and high frequencies.
Anyone bought or heard recently the D-Sonic M2-1500M or the M2-600M? What are your opinions?
audiozen
Nasaman...you obviously have not read through this thread to discover that three years ago D-Sonic was only using the B&O ICE amps in their two channel and mono amps and have switched to the Abletec amps from Sweden in 2011. Read the review from last September in 6Moons on the new D-Sonic M2-1500M mono block amp. Very positive. You can access the review on the D-Sonic website.
It is worth considering that the sound of an amp is the product of the entire execution: design (or topology) ranging from the basic to the complex and exotic, choice of active and passive components, boards, dyelectrics, soldering ranging from handmade point-to-point to computer-assisted surface mount, as well as final construction/assembly.

That's why no amp models ever sound alike, and often do not cost alike, even when they are based on the same core technology, be it 6550 tubes or ICEpower 1000 ASP power conversion modules.

Concerning amps based on the new Abletec power conversion modules, it will be fascinating to listen to what is achieved by a variety of designers and manufacturers, who will inevitably apply their unique ingenuity, design philosophy, and market / pricepoint targeting to their particular amplifier creations.

Saluti, Guido
Spoke to Rich today, who runs the Abletec branch office in New Jersey, he's currently at CES. He confirmed that indeed D-Sonic is using Abletec amps. He also mentioned that Parasound is premiering at CES a four channel amp using Abletec Class D modules. The amp is the ZM-Quattro. A four channel amp that puts out 90 watts per channel.
The thing with D-sonic is they are merely packaging stock Class D component amps, both Icepower and now abletec. They appear to have upgraded the components they use to do so these days compared to prior when IcePower only, at least as described for the abletec. DDs background as he describes seems in line with that. HE is not an amp designer so not likely to add circuitry to whatver component amp board they use, Ice, abletec or otherwise. Stock icepower is clearly inferior to enhanced versions from BC, Wyred and others with beefed up power supplies and input boards to make tube amp friendly. Stock icepower is not tube amp friendly for example at 10K input impedance. abletec input impedance is closer to that of Wyred for example now as I read ie somewhat less than 60K ohms, that is a clear advantage over stock Icepower. There may be others based on new technology used.

So be careful comparing stock Icepower to enhanced versions to other perhaps newer Class D designs. Each has significant differences. M-sonic alone using stock Icepower amps is not a good indicator of what IcePower can do.


I did a lot of research prior to springing on BC ref1000m amps, including d-sonic. The devil is in the details. New d-sonic amps are interesting as noted. I would expect them to outperform stock icepower in some cases like with tube pre-amps. Harder to call at present for other cases. Time will tell.