Outlier,
Sounds like you slowly ramp up the variac with the amps connected, powered on, and then set the desired voltage under load. This action over time will cause wear on the brush that contacts the autotransformer winding directly proportional to the connected load of the Joule Electra amps.
First I would not try to use the variac until you have it checked out. It could be something as simple as a fuse holder as Thaluza stated in his post. Or maybe even a loose connection. Or it could be more serious like a bad brush on the dial slider arm that contacts the winding of the autotransformer. If that is the case hopefully the autotransformer winding is not damaged.
If you are the least bit mechanically inclined you could pull the cover from the variac and have a look inside.... Make sure the variac is unplugged from the mains AC power before you start.... You could then see where the problem is. Look for a burned spot that will more than likely show signs of black carbon and will have a burnt smell.
Here is a nice video I found doing a Google search.
https://www.youtube.com/watch?v=M8cJrJyR87o
.
Jim
Sounds like you slowly ramp up the variac with the amps connected, powered on, and then set the desired voltage under load. This action over time will cause wear on the brush that contacts the autotransformer winding directly proportional to the connected load of the Joule Electra amps.
First I would not try to use the variac until you have it checked out. It could be something as simple as a fuse holder as Thaluza stated in his post. Or maybe even a loose connection. Or it could be more serious like a bad brush on the dial slider arm that contacts the winding of the autotransformer. If that is the case hopefully the autotransformer winding is not damaged.
If you are the least bit mechanically inclined you could pull the cover from the variac and have a look inside.... Make sure the variac is unplugged from the mains AC power before you start.... You could then see where the problem is. Look for a burned spot that will more than likely show signs of black carbon and will have a burnt smell.
Here is a nice video I found doing a Google search.
https://www.youtube.com/watch?v=M8cJrJyR87o
.
Jim