Which speakers will fill 5,000 cubic ft coherently


In porevious threads I've bemoaned the fact that my Kharma 3.2 FEs don't fill the room, 17 X 23 X 15 ft ceilings with a vertical enough soundstage, as though the speakers are literally too small. I have been advised to raise them,which I have done, , I have told to get taller, line arrays, even given names of custom speaker makers. Any specic recommendations from those that have had, and have conquered, this issue.
springbok10
If you scroll down the page on the Classic Audio Reproductions Contemporary Line page, you will see the T5. These look like traditional box speakers, yet they are 94dB and 16 ohms. I don't believe the T5 use a horn, although the T3 do...and they don't look like traditional horn speakers either.

Have you heard those speakers, Grant? The ones they had at the show that I was responding to were from their "Classic" line. I did not see the "Contemporary" line there(or perhaps I just didn't notice them as the Classics have a very commanding presence). Certainly neither would not fall into any 10" wide limit though. Coincident is a good call. Vienna Acoustics Mahlers perhaps, those also sounded great and are very capable of room-filling sound. Neither impressed me more than the TADs though. Can't recall if they'd fall into the 10" limit, but they'd probably be close.
>>03-16-08: Tvad
10" wide limit? Wow.<<

I can stretch it to 18" - just wont be able to open the drawer next to it. That means the Tyler Woodmeres, Zu Definitions, Presesnce of those mentioned, would do. There's a used pair of the former on A'gon for $6,500
I would think the impedance curve of the Zu Definition, Presence, or any of the Coincident speaker lineup would be better suited than the Tylers to your Atma-Sphere amps.
Tvad, I appreciate your input thus far (as usual). Which of all these contenders have you heard?
I've head the Definitions and the top-of-the-line Coincident model, but honestly I don't believe it matters what I think of them. What's most important is that the speakers you consider have impedance specs that mate with your amps. Ask Ralph.