Dynaudio Focus 140 vs Totem Model 1 Signature

Appreciate this input, guys. Poking around last night I found an ecoustics forum in which some Dynaudio lovers talked about the need for higher current and explained that it helped low volume listening. It's good to have that confirmed here, and it echoes what I experienced when I had a Marantz and Jolida 100W integrateds in my system.

I think I might leap for the speakers first (assuming I can find a used pair) and upgrade the amp a few months down the road. Any sub-1K used amp suggestions that pair well with the Dyns would be great to file away: if I could keep it closer to 600-700, that might make it easier.

That's interesting to know about the drivers, too! I've seen the Hi-Vi drivers but didn't know Totem used them...

Thanks again!

Throw some extra coin into your amp purchase or wait and save up to get a used Prasound Halo A21. The halo A21 has gobbs of current at 250w/channel and will make your speakers sing. Plus, you won't have to upgrade your amp if decide to move up the Dynaudio line in the future.

Most conventional transducers respond well to reasonable helpings of clean current. The Focus series is of no exception. Give em' some extra juice and they'll sing like angels. That said; their voicing and simple/efficient crossover will let you squeak by with something like the NAD C325.

When you gather up enough funds in the kitty to move on up the amplifier chain, I would highly encourage you to look towards tried and true synergies from the likes of Sim Audio, Naim, Krell or even NuForce. Of course, there are plenty of fantastic options that I'm missing out on. Oh well, that's a bridge you will have to cross when you get there.

Moving onto Totem real quick; I forgot to mention that the Model 1 does exhibit better low level listening behavior (to these ears, at least). In my experiences, Dynaudio products tend to come more into their own once a bit of volume is applied.

Also, its true that Totem uses the HiVi driver. However, my understanding is that this driver is used only in the Forest. I believe the Model 1 uses a bona fide Dynaudio driver, and I know without a doubt that the Mani 2 Sigs do.

Anyways, good luck!

Well, I'll definitely have to start off feeding the new speakers with the C325 and step up later when I have the money. I'd figured the Totems might do better at lower volumes because they have a little more treble emphasis, but I think I might be more satisfied over time with the Dynaudios' balance.

Rumadian--you mention Naim and Simaudio amps. My question, particularly concerning the Naims, is if even with a lower rating in watts, do they supply sufficient current such as you describe doing well for the Dyns? Simaudio's new integrated is 50W, and it would fall in my price range used. Not sure if I'll need to go for more pure power instead. Would a 50W tube integrated with good current like a Prima Luna or Cayin do the job?

After a decade with essentially my starter system, I'm looking to make my first significant upgrades--seeing the path ahead is helpful, so I know what to look for. Looking to put together a setup that's worth holding onto and has synergy. Thanks again for all the help and suggestions.

Ablang - Both the affordable Sim Audio i-1 and the Naim Nait5v.2 use robust power supplies with a fairly simple and efficient circuit. Unless you intend on cracking walls and shaking picture frames off a desk; they should be able to provide ample current for anything in Dynaudio's Focus range.

A 50w tube integrated would also suffice in most case scenarios. Although I admit; I'm not the right guy to confront about affordable tube integrated amps. While I love the warm touch of a valve, I haven't encountered too many truly affordable amps that could tickle my fancy.

My suggestion would be to follow up with the folks at Naim or Sim Audio. Ask them for their opinions. If I were in your position, I'd eye-ball either the Sim Audio i-1/CD-1 set-up, or the Naim CD5i / Nait 5i *version 2* set-up. You get synergy, form and function, well engineered electronics that are a proven match with Dynaudio (and even Totem) loudspeakers.

All the best!