Subwoofer damping


I didn't no whether to post this in the speaker or tech forum, but I'll ask my query.

I have a very large subwoofer which has 2 16 inch drivers. I fired this baby up today after having it in storage for many years. I played a reference recording of Frederick Fennell's Pomp & Pipes. Well I set the crossover pots at 10:00, 6 being the lowest and 5 highest. Everthing was ok till there was some low and I mean low frequency with plenty of dynamics. I could hear the drivers make a girgle sound that came out the 4 vents in the cabinet.

I can't recall if I've heard this before and I'm thinking that I need to add additional damping material. Doe's anybody supply speaker wool anymore? I can't imagine overdriving this thing....I think my house would collapse...so adding more material seems might help. Any speaker tech's with answers would be appreciated.

Roger
wavetrader
Wavetrader, I was thinking of "Skanning", which I believe was a fore-runner of Scan-Speak (which I'm not sure was in existence back then). Does that name ring a bell?

If so, those are probably fairly high Qts woofers (like some of the older Dynaudio drivers), and the large aperiodic box size makes more sense.

Shadorne, back in the early 90's when those drivers were made nothing even remotely approaching the TC Sounds woofer was in production, and probably not even on the drawing board. In those days, 10 mm linear peak-to-peak was considered high excursion.

Duke
Ooops - I was logged in on an sick friend's account (at his request - he has trouble typing now and wanted me to post an ad for him) and forgot to log off before posting. The post just above should have been under username "Audiokinesis".

Duke
I actually wasn't thinking that your amp was clipping . . . I was speculating (as have a few others) that it's the subwoofer drivers themselves that are overloading.

If the drivers are exposed on the bottom, and there are four ports, then I was wrong . . . this IS a reflex enclosure . . . and it's alarmingly big. That is to say, by conventional practices, the guy who designed it maybe didn't know what he was doing? It's probably a minimum of 19 cubic feet or so internal volume, even subtracting for internal bracing, driver magnets and baskets, etc.

For comparison, the JBL 2235 was a 15" of the era with a low Q and low Fs (i.e. might be similar to your drivers in concept) and a pair of them work well in a reflex cabinet of less than 8 cubic feet. If I was to install a pair of 2235s in a cabinet similar to yours, I would expect it to behave much as you describe, with uncontrolled cone excursion at certain frequencies.

So I would do your research on this thing's background and design to try to determine if it indeed CAN work correctly. If it's a one-off piece, then you need to figure out EXACTLY which drivers you have, and see what their common configurations were. And even if you do determine that it's intelligently engineered . . . the drivers themselves could be shot. I'm assuming you would recognize rotted foam surrounds, but another very common issue in older, downward-firing systems is spiders that have lost their springiness and have started to sag (like so many other things do with age, when they are called upon to defy gravity).

No amount of stuffing, or electronic compensation, can make it right if you have worn-out drivers in an ill-conceived enclosure.
Kirkus thanks for your thoughts. I havent talked to the designer in a year but I will have to see if I can contact him. He definately is capable as a designer and audio engineer. He designed me sattelites and their crossovers along with my mono block amps. They are incredible speakers.

I guess I'll have to inspect this. I know for sure Scanspeak made the drivers. I will report back as things progress.

I am going to replace the current crossover. Probably with a NHT X2 as it looks to be the best fit for my system.

Thanks
Roger