Dunlavy SC IVA X-over resistor values

DAL's have narrow dispersion. You need to pay precise attention to exactly where you position your head when listening and making A/B comparisons. A few inches may change what you hear when listening critically. Typically it is recommended to place them far apart and toed in - this means if you lean forward then the sound may change considerably too.

Respectfully to Shadorne, if DALs have a narrow dispersion then why is distance and angle from the sidewalls so critical, as well as the reflectivity of these walls?

My experience with DAL and Duntech speakers suggests two conditions. The speakers are of such quality that listening outside the "sweet spot" can still be very pleasurable. But I will admit that to optimize critical listening, where you sit will be important. And this relates to vertical position of your ears as well as horizontal position. This is because of the D'Apolito array of drivers -- think of them as a stereo pair turned 90 degrees and it should be obvious why placing your ears at tweeter level is important.

Back to Jonathan, for your DALs I would do everything that is practical for placement and room treatments before worrying about future tweaks to the speakers themselves. Just as with any quality speaker system, you should start with the environment where they are ask to perform.

if DALs have a narrow dispersion then why is distance and angle from the sidewalls so critical, as well as the reflectivity of these walls?

Precisely because they have narrow dispersion!

Narrow dispersion speakers, when listening far-field, are typically very finicky about position. Think about an ordinary light bulb versus a flood light - what you see is a combination of direct and reflected light. It is the same with hearing.

To continue the analogy, the lighting in the room will be most even with the omnidirectional light bulb (more reflected light). The light bulb is clearly less sensitive to location/direction. The flood light will be much more sensitive to placement/direction...only with careful positioning can one get the desired reflected light to evenly illuminate the sweetspot. It is the same with speakers - wide dispersion makes placement very easy.

And even yet when these speakers are properly coupled within their own cabinet and to the room cabinet that surrounds them they truly become three dimensional and much less critical to placement. Ya just got to venture out and do it. Tom

Shadorne, I've read your response a couple of times and it does not make sense to me. Assuming you meant an unshaded light bulb (360 degree radiation) compared to a spot light (believe flood lights come in a wide variety of radiation patterns) in your analogy, it seems to me the opposite would be true.

From my reading on speaker placement, acoustics, and room treatments, it appears that a minimum of 10 msec delay is typically recommended for reflected sounds compared to direct sounds. This minimizes smearing and improves clarity. Now the narrower the dispersion (more focused, like a spot light) from a given speaker, the less the intensity of the sound waves reflecting off the sidewalls. Conversely, the wider the dispersion pattern, the greater the intensity of the reflected sound waves and the more important placement and/or treatment would become to satisfy the 10 msec or greater delay objective.

Both DAL and Duntech designs are fairly wide dispersion which is why sidewall reflections are critical to optimum set up.