Can you get "bookshelf sound" from a floorstander?

tvad, eyedriver had already started a different string so i did not see the harm in going on with 9rw.
9rw, many in audio that think they have a benchmark design take it as far as they can to really refine it. how many watt puppys and vandersteen 2's have there been thus far.
the merlin vsm has been made for 15 years and there have been 7 generational changes during that time. many thousands of pairs have been built and sit in their homes around the world. countless great show reports, reviews, manufacturer recommendations/usage and most importantly, sales, have prolonged the life of this now, mature product.
i am very proud of it because it is my life's work. i do not take kindly to having a person who had owned a pair 10 years ago imply that they are the same today without even hearing them. does that sound fair to you? it seems very few share your opinion of the vsm and in fact, there are more great reviews coming from europe where they have all of the product we have here and more. i'll tell you what, read http://merlinmusic.com/reviews/ital_tsmmme.htm
because this was just published and if you get back to me without the "i know better than you attitude", i may be able to find the time to tell you what we have changed. but i will not take the time to try and explain something to a person who already has preconceptions about it. i say this because it will take some time to do. in fact why not call me at the plant this weekend at 585 367 2390. i will be there every day.
best, b

Good reviews, which these days are a dime a dozen, and your enthusiasm are what got me to buy a pair of VSM SE's in the first place. While they weren't by any means terrible speakers, they never lived up to the promise -- at least not for me.

So I don't care if you point me to a dozen rave reviews, which are often the result of buying ads and being popular with writers and publishers as much as anything else.

Also, I forgot to mention that another preamp I had with the Merlins was the Levinson 380. When I replaced it with the ARC LS25, you said it was an improvement over the Levinson. It was, but I guess it still wasn't what's needed to make the Merlins sing. That's what I was referring to when I entered this thread. The Merlin speakers are incredibly fussy about associated gear. If that's not the case anymore, I stand corrected.

So while you make a generous offer for me to call you on a holiday weekend, I think I'll pass. I do wish, however, that you would tell everyone about how exactly the drivers, crossover and cabinets differ from the ones I had in 1998. I'm sure you can summarize.

And, finally, I have often praised you as an individual for your passion, the quality of the components and the build quality of your speakers, and your customer service. I don't know of any better. Thank you.

9rw, i will respond to some of this today in your mail and the rest over the next 2 days. got lots going on now.

Good reviews, which these days are a dime a dozen, and your enthusiasm are what got me to buy a pair of VSM SE's in the first place. While they weren't by any means terrible speakers, they never lived up to the promise -- at least not for me.

the last 5 words are very important because maybe they didn't for you, but they did and more for many others.

So I don't care if you point me to a dozen rave reviews, which are often the result of buying ads and being popular with writers and publishers as much as anything else.

these people do not know me from adam and merlin has never adverised there. this is in italy. the reason i sent it to you is because andio morotti is the pen name for two gentlemen, one a musician and the other and engineer. even though it is a review of the tsm mme i thought it would give you greater insight into many of the things that are important to you.

Also, I forgot to mention that another preamp I had with the Merlins was the Levinson 380. When I replaced it with the ARC LS25, you said it was an improvement over the Levinson. It was, but I guess it still wasn't what's needed to make the Merlins sing. That's what I was referring to when I entered this thread. The Merlin speakers are incredibly fussy about associated gear. If that's not the case anymore, I stand corrected.

current production has shown people using ss and tubes with many types of cable brands. the days of being fussy are over. and if you go to the audioreview and read many of the consumer comments you will see people saying that the speaker made so much more of their music collection listenable, even their poor recordings.

So while you make a generous offer for me to call you on a holiday weekend, I think I'll pass. I do wish, however, that you would tell everyone about how exactly the drivers, crossover and cabinets differ from the ones I had in 1998. I'm sure you can summarize.

i will start tomorrow, sunday with the first of two installments.

And, finally, I have often praised you as an individual for your passion, the quality of the components and the build quality of your speakers, and your customer service. I don't know of any better. Thank you.

no, thank you.
b
9rw (Threads | Answers)

9rw, the bam came out in 1997 and was first an ac device. in a year or two we came out with the battery bam which ran on 4 x 9.6v german mnh cells. a charger was internally included. at first 170 mah cells were avalable, then later 200 mah and now 230 mah. it is documented here on agon what the people who owned them thought but as the battery potential went up the resound/dynamics and bass extention/fullness did too. the batteries played the system in a smoother, clearer, more expansive manner with more bandwith than the ac version. later the bam was upgraded to the sbam with a switching power supply that opperated from 100 to 230v and at 50 or 60hz so it could be used here in the us or anywhere in the world. the charging caps were changed to nichicon muse series and the voltage regulation lessened by 25%. this last change made a huge difference as the unit sounded way more expasive, more extended in bandwith, fuller, clearer and smoother with less distortion. do not down play the sbam's importance, it is a dual bandpass filter and equalizer enabling the vsm to play with bass associated with much larger speaker systems. it filters rfi and emi in the top end and out of band energy in the bass below the fs of the woofer at 28 hz. this reduces 2nd and 3rd order harmonic distortion in the bass and im distortion in the mids. the bass driver can be played much louder than a basic unit because the voice coil is kept in linear drive in the gap much longer and at mouch louder levels. it is also in the signal path and its affects are extremely obvious. again well documented here by users and reviews. and with you not hearing these changes this will be your only source of information.
last came the lead free super bam and that was the crowning achievement. it made the unit play with more substance, bandwidth and a blacker background. many have sold the earlier versions on agon to get the lead free version because it sounds so much more continuous and natural.
best, b

9rw,
the drivers are similar but both have been changed.
the esotar 330 had the suspension related amplitude depression moved lower in freq and deminished making it sound more linear and dynamic/less nasal. output went up and distortion down. the torque settings holding the face plate on were more correctly adjusted to the driver's needs in our speaker system. then a few years ago the drivers were made lead free and soon after we started taking them apart and changing the solder internally to the cardas trieutectic lead free we use in the crossover. comparing the sound of a millennium top end to the se and earlier is quite startling. the mme/mxe even more so.
the woofer, up until the se was the stock scanspeak 8545. in the millennium and later, the 8545-06. this is a driver that is made for merlin only. it uses a mueller latex compound to add mass to the cone which quiets the upper end resonances evident in the mids of se. latter versions of the 8546-06 were made lead free and shortly after that we started soldering them internally with the cardas lead free trieutectic we use in the tweeter and networks. the result is a more continuous and smooth transition to the woofer. this makes the speaker sound more coherent, like a one way.
crossover and cabinet tomorrow.
best ,b