Trying separates for the first time

Right you are, Schubert...

The line-level section has a single triode amplifi­er also direct coupled to a high-current output stage. These output buffer stages minimize the output impedance, making the Classic-2 compatible with nearly all installations, including those requiring long lengths of interconnect cable. DC plate voltages are supplied by a very low impedance discrete regulator, designed to prevent the power supply from imposing its own colorations on the audio signal. A regulated filament supply further isolates the unit from ac line voltage fluctuations

A clean signal, but be cautious of high voltage peaks; eg, Telarc 1812 Overture.

I got the CJ preamp last Thursday and spent much of the weekend breaking it in, trying different cables, etc. I have to say, I'm very impressed by what I'm hearing. And the CJ and the Marantz TT are still both breaking in, so things should only get better. Transients are very lifelike, and there is an openness and ease to the sound that I've never heard before. Instruments sound more real, and voices are spot on. I'm still learning about how to set up a turntable, so I'm sure that the Marantz could use some tweaking. Overall, though, I'm very pleased. I also have some Harbeth P3esrs on the way that will eventually be in a bedroom or office system, but I'm looking forward to breaking them on my main system. From what people have told me, they might just say put.

Hope all is well with everyone. Back to Coltrane….

Scott

Scott,

Glad to hear you're liking the tube pre with the ss amp. Seems like Schubert had a very bad experience of a blown tube taking out his speakers. Terrible and I'm not going to say it's not possible. Blown tubes are typically much more common in tube amps than preamps. The only comfort I can offer is that blown preamp tubes resulting in blown speakers is not a common issue although always a possibility. I used a tube pre with both a class A/B and class D solid-state amps for a period of 10 years and never had a blown tube.

The harder part, IMO, is knowing when tubes need to be replaced. Tubes wear down so gradually, over such a long time span, that degradation in sound is hard to notice and you become accustomed gradually to the slowly degrading performance. You only become aware of the extent of the degradation in performance once the tubes are replaced. I found it's better to replace the tube(s) after a specific time, say every year, than to rely on your ears. When you listen once the fresh tubes are installed and broken in for the required duration, the improvements are very obvious.

I hope this helps you a bit.

Enjoy,
Tim