How much am I missing with SL1200 mk2?

I have to admit that(as I remember it) I thought the Technics SP10 mk2, I heard on the needle drops, was more competitive with the best turntable sound I heard there(Pink Fish Media). In addition, the SL 1200 had some mods(one improved the table for sure.). The question is cost and getting an arm, I guess. If you go the SP 10 route, I still suggest you audition, to see if it satisfies you.

Guys,

Again, a lot of great info, thanks. Unfortunately, I don't have a background in electronics and am unable to maintain/repair vintage gear. If the 1200 weren't so hardy I would not have it.

At one time, I traded in and out of a fair amount of vintage gear. Once I had some well regarded pcs, I would read how good the units would sound if I would bring them up to spec via, recap, power supply rebuild, etc. Point well taken- but my bargains would lose some luster after a thorough going through. Not to mention not having a personal relationship with someone I trusted to do the work. The honest guys out there seemed swamped and if you were lucky enough to get them to do the work- it may take months.

I just looked into some discussions on the SP10, and read the units would need to be brought up to spec to sound as good as it's younger brother SL1200 mk2. (Unless I read something wrong.)

I've never had any high end vintage turntables, but if it is labor of love, I better pass. Just don't have the skill and patience.

If the 1200 died today, I'd probably go buy a Rega table with Rega headshell and install 3 screws and be done. Otherwise, I'd be wearing a paper protractor out to check alignment one more time!

I know it may be blasphemy - but I use the Technics overhang gauge on the Sl1200! Hopefully, we are still friends...

Thanks again,
Gary

"09-08-15: Uncledemp
Hi, the phono stage is in my Anthem integrated. But I see your point. The answer is yes, I can change the phono stage by adding one between the Technics and the Anthem via Aux input."

I wasn't suggesting that you bypass the phono stage in your Anthem. That should work just fine for your needs. The TT itself has a built in phono stage, and if you can't bypass it for some reason, you can't use the one in the Anthem, or any other one in between. You'll have to plug the TT directly into a line level input on your integrated. If you can't use the phono stage in the Anthem, I would consider a different TT. But that's just my opinion, and I know many people really like the 1200, so I understand why they want to keep it.

I didn't know the SL1200 had a phono section built in. I've been using the phono input on the Anthem. Am I doing something wrong?

09-09-15: Zd542
"09-08-15: Uncledemp
I wasn't suggesting that you bypass the phono stage in your Anthem. That should work just fine for your needs. The TT itself has a built in phono stage, and if you can't bypass it for some reason, you can't use the one in the Anthem, or any other one in between. You'll have to plug the TT directly into a line level input on your integrated.

You either have no experience with an SL12x0 Technics turntable or you are confusing it with a latter day copy by another manufacturer. The Technics SL12x0 series turntables--all of them--do not have--and never have had--a built-in phono stage. They were designed in the '70s and early '80s, when *every* receiver and integrated amp had a phono stage.

The output of any SL12x0 direct drive turntable is RIAA signal coming off the LP. Period.

There are latter day and cheaper turntables that have built-in phono stages. Two such are the Audio Technica PL120 and PL240 direct drive turntables. They are styled like the Technics and they're decent for the money, but they aren't in the same league as the SL12x0 series when it comes to close tolerances and slick and silky feel. And they were designed after most mid-fi receivers and integrated amps only had line-level inputs.