Bottlehead Crack

Thanks Zavato. I agree with this number now. the high-pass filter is formed by a 100uF & a 32 Ohms (of the headphone) & indeed the -3dB corner of this high-pass filter = 50Hz (49.76Hz to be exact).

Philjolet, just FYI: this same FAQ #6 also states exactly what I stated - low impedance headphones will tax the Crack unit by asking it source too much current.

This FAQ section might a good one to read for you Crack owners (those that have not already read it)
http://bottlehead.com/smf/index.php?topic=4295.0

Thanks guys!

Bottlehead seems to be very thorough.

I decided the most important thing is getting the Crack to sound it's best so I bought some Sennheiser HD600s. It will be a while before I get the amp (they ship them in batches) and then I have to build it.

I will report back when I actually get to listen.

You won't regret it. The combination is just mind blowing.

a very enthusiastic yes from Tgrisham!

thanks for sharing!

I am in the process of building their bee pre. Very impressed so far everything is laid out good and the instructions are phenomenal with lots of pictures. It's my second kit one I did from another manufacturer was brutal. Some parts didn't match the instructions and when you asked questions basically all he said was look at the schematic. I would definitely recommend bottle head for anyone as their first kit or who is nervous about DIY.