Granny ring, Jetrexpro, all

Thanks Rob! I assume you use a standard black 3/8" PET sleeve over the twisted WE 10ga / 14ga wires.
The Belden 8402 part is also on its way. Would you recommend any additional shielding (one end soldered to avoid ground loops)?

Jazz, I used these on deep,discount at Sonic Craft......

2 x Neotech NC-P311 Male - 12.8mm (000060) = $59.90
2 x Neotech NC-P302 IEC (000055) = $79.90
--------

/Grannyring: thanks for the info. I tried the NC P311 before, prefer the more solid construction of the Furutech F11 but with the current P302/P311 RH variants discounted ($35 at PartsConnexion) it is hard to pass up on them. BTW the original purple P302/P311 run at about the same price at SonicCraft.

Jazzonthehudson,
I used the Furutech, very happy. Made same as Jeff Day Blog. Best, Rob

Jeff Day does not experiment as much as some of us. He gave up on the WE16 as ICs before he shielded them. Big miss!

The WE16 is not the best choice for a power cord. He should have tried the 9-11 gauge WE options as they are wonderful.

I even found the WE10ga stranded to sound better in my system then the 16ga.

I understand this takes time and in return you learn much more.

I don't think there is any magic in the connectors he used on the power cords and the Neotech may sound better or worse with the WE wire. Mine sound wonderful with the Neotech parts.

Others have found the Canare RCA connectors to sound better than the Switchcraft. I will put those in next!

I love the fact that we experiment so much here! We have all learned a great deal for sure.