1. Home
  2. analog
  3. 119166-2238

VPI Traveler skipping - no anti skate

Hi everyone,

Back again with another analog question.  For Xmas I bought myself a VPI Traveler, and I've been working on setting it up today.  It sounds absolutely fantastic...for about half a song, and then it starts skipping.  The tonearm has a tendency to pull towards the rim of the record pretty significantly.  There is no anti-skating adjustment on this table.  VPI only recommends applying a slightly higher VTF (about .1 gram).  They also suggest a slight twist of the tonearm wire to apply slight pressure to the tonearm.  

Well, I have tried both a Grado Sonata and a Denon DL-110, and in neither case can I get through a song without the record skipping as the tonearm pulls back towards the outer rim of the record.  I have raised the VTF, fiddled with the tonearm height, checked the leveling of the table, used 180 gram and standard records.  In all cases it skips repeatedly.  

I found one other discussion of this problem on Steve Hoffman's forum, but there was never a resolution posted. Any thoughts on what I might do?  

Thanks, Scott
smrex13
mofimadness's avatar
mofimadness
4,152 posts
 
Make sure the arm is not touching the cueing lever support bar.  This happens all the time.  You might need to lower the arm lifting tower just a bit so it isn't touching the arm.
smrex13 OP
423 posts
 
Already checked that.  And now the tonearm came loose.  I think I'll buy a CD player...
smrex13 OP
423 posts
 
Ok, got the tonearm fixed up - one of the screws had come loose inside the housing. Anyway, still skips on every song.  The arm pulls back towards the rim.  It's a 12 gram tonearm, and by all accounts the Grado should be a good match.  

Any other thoughts?  The anti skate mechanisms that I've seen are to help the arm counter the inward pull of the record.  In this case, I'm trying to counter the opposite problem - it's like the arm wants to get back on the armrest. 

Frustratedly yours,
Scott
mofimadness's avatar
mofimadness
4,152 posts
 
How are you checking the VTF?  Do you have a digital gauge or something like a Shure?  And what VTF are you using for the carts?

A tonearm is pretty simple if the bearings aren't wasted.  If it skips on every song, something has to be impeding the arm's movement.

I know the Traveler's arm is a little different to set tracking force.  Are you sure you are doing it right?
More to discover