1. Home
  2. analog
  3. 119166-2238

VPI Traveler skipping - no anti skate

Hi everyone,

Back again with another analog question.  For Xmas I bought myself a VPI Traveler, and I've been working on setting it up today.  It sounds absolutely fantastic...for about half a song, and then it starts skipping.  The tonearm has a tendency to pull towards the rim of the record pretty significantly.  There is no anti-skating adjustment on this table.  VPI only recommends applying a slightly higher VTF (about .1 gram).  They also suggest a slight twist of the tonearm wire to apply slight pressure to the tonearm.  

Well, I have tried both a Grado Sonata and a Denon DL-110, and in neither case can I get through a song without the record skipping as the tonearm pulls back towards the outer rim of the record.  I have raised the VTF, fiddled with the tonearm height, checked the leveling of the table, used 180 gram and standard records.  In all cases it skips repeatedly.  

I found one other discussion of this problem on Steve Hoffman's forum, but there was never a resolution posted. Any thoughts on what I might do?  

Thanks, Scott
smrex13
smrex13 OP
423 posts
 
Thanks everyone.  Yes - the turntable is level, and it skips on every record I put on, not just the older/dirtier ones.  I tried running it without the wire as recommended above, but it still skips constantly.  At this point, it's completely unusable, so I'm just waiting to hear back from a "specialist" at Music Direct.   This experience makes me hesitate on trying another table with no anti-skate.  

In my searches online I've come across several people who have had either the similar skipping problem (pulling back to the outer rim of the table) or the tonearm issue (coming loose from the housing).  

I'll keep y'all posted,
Scott
inna
5,245 posts
 
Yes please do. 
smrex13 OP
423 posts
 
Looks like Music Direct is going to exchange it for me next week.  I'll give another Traveler a try and see what happens....
More to discover