stick w/ Bryston for a pre-amp. If you want to go into tubes, seek Audio research (ARC). Both are a sonic match for your power amp.
Which brand(s) of cables/power cords are you planning to use?
Keep me posted & Happy Listening!
Recommended amp for Thiel 3.6 -- newbie
Nice amp to drive the Thiel’s with donzi, you’ve done the right thing and got an amp that give good current, for the Thiel’s nasty load impedance. Before buying a preamp donzi, what sort of source do you have or going to get, and does it have it’s own built in volume control? This way you may be able to do without a preamp, and most likely get a better sound by not using one, as the Bryston has a good 50kohm rca input impedance and highish gain, that’s switchable from 23db to 29db. I suggest you try this Schitt Sys passive preamp if your source has no volume controllability, for just $49us and a two week trial period. http://schiit.com/products/sys Cheers George |
Donzi, while I don't have the 3.6's I do have the CS2.4's. I can assure you that they will need high power/current and a quality front end. If not they will tend to sound bright and bass will be flat. After all was said and done I ended up with a Parasound A21 amp and a Balanced Audio Technology tube pre amp. This was the best combination of power and front end I could afford and make the system really sing. You will also need to consider quality cables. I have PAD Venustas speaker cable and Cardas Clear Light interconnects. Your Thiels will sound brilliant but it will take a great front end to do so. Btw I tried to use a Denon AV receiver with an old Carver amp from the pre outs and it was super way lacking on all accounts. |