Neutral electronics are a farce...


Unless you're a rich recording engineer who record and listen to your own stuff on high end equipment, I doubt anyone can claim their stuff is neutral.  I get the feeling, if I were this guy, I'd be disappointed in the result. May be I'm wrong.
dracule1

geoffkait

It is a logical fallacy that one can automatically achieve audio nirvana using an ideal amplifier, assuming for a moment that is what yours is. Things are just not that simple

Your right things are not that simple. This is why it took 25 years of intense research targeting one problem - distortion in AUDIO amplifiers.

No one else has come close to a full understanding of the amplifying process used specifically for signals in the audio spectrum. Amplifiers used for radio, video, uhf, microwave etc. do not have to deal with delivering analog data from a different medium. Audio amplifiers require the total package that must include velocity. The signal has to return back to sound waves in your home. It cannot be done in an environment where the velocity is unchecked.

Try to remember back in the day when you may have went from a mid-fi Kenwood or Sansui receiver to your first real audiophile gear (most likely tubes) and what a stark day and night difference it made.  For you It was a whole new world of audio. Finally it sounded like real music.

Then there was the horror of new digital (CD’s) on the scene and all it did was give you stress and was not anything like a good analog front end.

(I'm sure most of you will say it is still the case)

Look at how difficult it was for me to explain the [fact] that there are 2 separate distinct speeds happening in the amplifier.

1)     Electricity traveling at (speed of light)

2)     Electrical signals representing sound waves traveling at (750 mph)

This is nothing new – if the wave phenomenon could not “flow” through the hardware at this speed you would not be able to use it for audio.

What I have done is to guarantee the flow will be at exactly one constant speed or velocity.

That was no simple - It takes control at quantum levels to achieve this function.

If the velocity is perfectly nailed down – you have emulated the properties of air.

It has never been done before. That’s why it is a breakthrough. That’s why when you hear it in operation it is not recognizable as electrically delivered sound.

All it takes is for people to be open minded enough to learn something new that directly impacts the world of entertainment.

Judge for yourself [after] you hear what it does

The worst skeptic is converted within seconds of exposure to this process.

They may have no idea how it was done - but now know it obviously works.

Roger

Sheesh are things really so dire? My stuff sounds great. Maybe on the bleeding edge.....

One thing never changes....worry about the things that matter that you can control, not those that do not as much and you can’t.

Obsessive compulsive audiophiles are fine. Someone has to worry about the outstanding details in a lab environment before something is ready for mass consumption.

Its just not me though.   I spend my time listening and enjoying the music whenever I can.

I’m an east coaster and usually try to get to Capital Audiofest each summer. Always some nice finds there.

I think it is a matter of how stable and how focused compared to live.
I recommend that you get a set of really good microphones (I use Neumann U-67s) and go out and make your own recordings. That's what I do (Canto General, which was produced on LP and CD, is one of my first reference disks, produced in 1986). Having been there at the recording site and having heard what the microphone feed did (and having heard many microphone feeds before and since), I can instantly if something is right or not. Having your own reference is really handy; how else are you to know if a recording is really sounding right?

Stable and focused is no worries.
I guess you can compare the difference between a photo taken with a 3 MP camera, a 5 MP camera etc.

What if you take a picture now with a 100 mega pixel camera?
They are all stable and focused but now you can see detail that only could have be seen in person.

My auto-focus uses quantum physics and is accurate to parts per trillion.
Semiconductor manufacturers do not make a device that can do this.
That's why I had to make my own devices.

Roger